I recently shortened the barrel on my RWS 48 and outfitted it with a Riton scope (hope it holds up) so I don't really need the front sight anymore. I am looking to cover the barrel with something more appealing, but I can't seem to find anything that fits on it. Does anyone make a decent muzzle device that fits on 48 barrel? Thank you.
Diana Diana 48 muzzlebrake?
- Thread starter muradtexas
- Start date
Any 16mm break or shroud should fit, as long as you didn't discard the inner barrel shim/sleeve -
Upvote 0
this is the type that would be a normal Diana style
but they are out of stock and it would need just a little shimming
https://www.pyramydair.com/product/air-venturi-universal-muzzlebrake-655-590-id-855-od?a=4753
but they are out of stock and it would need just a little shimming
https://www.pyramydair.com/product/air-venturi-universal-muzzlebrake-655-590-id-855-od?a=4753
Upvote 0
I just added a muzzle brake to my Diana 48. It is a 2014 model new in the box.
I want to use it for Field Target Hunter class . So I added a 16x scope and wanted to remove the open rear sight and plastic front sight.
I got the Air Venturi one from Pyramid air and it is a perfect fit. The outside sleeve has a spring tube inside. I had to cut the outside sleeve. Then make sure the grubs screws that secure the muzzle brake line up with the internal spring sleeve slot. That way the sleeve is not damaged and held still.
I cut the tube so the brake is just a crown protector. And does not disturb the pellet as it exits the barrel.
I want to use it for Field Target Hunter class . So I added a 16x scope and wanted to remove the open rear sight and plastic front sight.
I got the Air Venturi one from Pyramid air and it is a perfect fit. The outside sleeve has a spring tube inside. I had to cut the outside sleeve. Then make sure the grubs screws that secure the muzzle brake line up with the internal spring sleeve slot. That way the sleeve is not damaged and held still.
I cut the tube so the brake is just a crown protector. And does not disturb the pellet as it exits the barrel.
Upvote 0
I have not noticed any. This is actually not a muzzle brake on my Diana 48. It is so far back it is really just a nice looking crown protector to replace the plastic open sight.
Upvote 0
Can you give the model number for the brake to get plus any other items thanks really looks good
Upvote 0
Steve v where did you get the black stock been looking for one so I don't destroy the wood stock . also what scopes do you all use mine destroy everyone I use thanks
Upvote 0
That is actually a wood stock that was sanded and refinished with rattle can truck bed liner. Turned out great.
I always have had great luck with Bushnell 1" scopes. Legend, Trophy, even the Banner have all held up on that black 48.
I always have had great luck with Bushnell 1" scopes. Legend, Trophy, even the Banner have all held up on that black 48.
Upvote 0
