Diana Diana 48

Old UTG True Hunter without the IR. This thing is a tank, has over a thousand shots on it. It even survived the early days before I bent the barrel to optical center, when the right windage adjustment was maxed out with no spring tension on it. It out shoots my HW's now.

IMG_2003.JPG
 
If its wrecking scopes, fix the gun. A 48 that isn't slamming with a loose piston seal and wildly over sprung shouldn't be that violent.

As for the fogging, I've found that a lot of really cheap scopes arent sealed well. So even if they put nitrogen in them (which I'm skeptical of) it surely leaks out in short order.

If the scope fogs up, but still holds zero, I might not immediately blame the gun.
 
Last edited:
I am using a UTG scope on mine. And
I just installed a vortex kit in my Diana 48. It is very accurate but I wanted to reduce recoil to save the scope. Shooting 10.3 gr pellets at 880 fps it is still a power house. I don’t use it for hunting and when I do my part it’s a tack driver. So I might try a 12’ft lb spring. To soften it up even more. From the factory it is definitely the kind of gun that will brake a scope not rated for airguns. What happens is the reticle comes loose and starts rotating.

IMG_5943.jpeg


IMG_5949.jpeg
 
Last edited:

The side wheel is just a UTG side wheel it is held on with screws and rubber pads.
The scope has been on every springer I own . From a Browning leverage to my TX200. But as I upgrade I keep moving it. I don’t like the light and it does not have an etched reticle. But it works and has held up for ten plus years.

I really like the Diana 48 . It is a recent purchase. It has the T6 trigger and was like new in the box. It really was a cannon when I first got . Now it’s really good with the 18 ft lb spring but it takes some skill to shoot consistently. I think the 12 ft lb spring might make it easy to shoot.
 
  • Like
Reactions: fishing43