If you are a fan of the two-stage Diana DIT (Diana Improved Trigger), be advised that it appears that these are being phased out on the latest-manufacture Chaser, and even more recently, the Airbug pistols. It seems the "bean counters" never rest, and always find new ways to save a few pennies here/there. The Bandit (PCP) pistol, however, is apparently still being supplied with the DIT. You can easily spot the difference visually by observing both the trigger "bow" and the trigger guards on the pistols. The DIT trigger uses a 3-screw setup for adjustments, one of which is located in the trigger bow itself, and accessible via a slot in the bottom of the trigger guard. The Diana pistols NOT equipped with the DIT will have a 2-screw setup, with the aforementioned adjustment screw now eliminated from the trigger bow. These 2-screw triggers also utilize a shorter sear lever as well. The trigger guards on the 2-screw triggers will also have the bottom adjustment "slot" eliminated as well, so the bottom of the guards are completely "solid". The Artemis CP-2 pistols (basically a copy of the Diana Chaser) have apparently suffered the same fate, all of these now have the "2-screw" setup as well. The good news is that BOTH the DIT and the 2-screw triggers can be adjusted for a very nice break. The DIT triggers are easier to "get there" though. For mods/adjustments on the DIT triggers check out marflow77's posts on these, great info w/pics on the DIT triggers.