DIN300 Male to CGA347 Adapter?

[mtnGhost]

There's a local shop close by that I discovered that would be able to fill my Great White if I have a CGA347 (they do a lot of Fireman tank fills and such).

Dows anyone know of this adapter can be purchased somewhere or would I need to find a machine shop to make one for me?

 

[Peskådot671]

I got the exact same DIN300 to CGA-347 adapter from Joe Brancato, airtanksforsale.com for my Great White.

 

[prfssrlee]

mtnGhost:

If you want, you can get one of these:

Female 1/4 NPT to Male Din Adapter Thread 300 BAR - https://ebay.us/o3oW7J

And one of these:

CGA 347 (SCBA firefighting) x 1/4" MNPT Adapter (F-06181) - https://ebay.us/Omrm73

And for $35, you've got your adapter. I did mine this way and all you need is a bit of teflon tape for the npt thread. Or you can certainly buy the one referenced above for $65.

 

[mtnGhost]

mtnGhost:

If you want, you can get one of these:

Female 1/4 NPT to Male Din Adapter Thread 300 BAR - https://ebay.us/o3oW7J

And one of these:

CGA 347 (SCBA firefighting) x 1/4" MNPT Adapter (F-06181) - https://ebay.us/Omrm73

And for $35, you've got your adapter. I did mine this way and all you need is a bit of teflon tape for the npt thread. Or you can certainly buy the one referenced above for $65.

Awesome! That should work just fine

Thanks!