Does anyone know how to assemble a Feinwerkbau P44 Regulation Valve?

[ricardocabralsousa]

Does anyone know how to fix a Feinwerkbau P44 régulation valve?
I already order all the parts but dont know how to assemble….
Any help?
thank you

 

[Cajun1024]

send an e-mail direct to FWB. Tell them you need the correct washer stack for the pistol. without the correct sequence you are screwed. Ask me how I know. Beat my brains out trying to get them straight on a P70. Good luck

 

[marflow 777]

it looks straight forward
there are 3 different parts diagrams the last two are the same but the one you have posted is for the August 2007 version
the other two versions use the 3.4.350.240 shim
from the diagram it looks easy i hate to say the pieces of the puzzle go where they belong
https://www.feinwerkbau.de/en/service/downloads/technical-information/exploded-drawings

 

[ricardocabralsousa]

send an e-mail direct to FWB. Tell them you need the correct washer stack for the pistol. without the correct sequence you are screwed. Ask me how I know. Beat my brains out trying to get them straight on a P70. Good luck

 

[ricardocabralsousa]

I order this:
3.4.350.203
1830.147.9 3x2( 6 screw)

4.9.0002
6.2093.028(6x)
4.9.0015
4.9.0016
4.9.0017
0,20 dick)6.0988.009
0,30 dick 6.0988.008
0,35 dick)3.4.350 235
0,40 dick) 3.4.350.240
0,45 dick)3.4.350.245

0,50 dick) 6.0988.007
Thank you

 

[ricardocabralsousa]

it looks straight forward
there are 3 different parts diagrams the last two are the same but the one you have posted is for the August 2007 version
the other two versions use the 3.4.350.240 shim
from the diagram it looks easy i hate to say the pieces of the puzzle go where they belong
https://www.feinwerkbau.de/en/service/downloads/technical-information/exploded-drawings

I order this
3.4.350.203
1830.147.9 3x2( 6 screw)

4.9.0002
6.2093.028(6x)
4.9.0015
4.9.0016
4.9.0017
0,20 dick)6.0988.009
0,30 dick 6.0988.008
0,35 dick)3.4.350 235
0,40 dick) 3.4.350.240
0,45 dick)3.4.350.245

0,50 dick) 6.0988.007

 

[marflow 777]

you have 8 washers
6 in the middle are all the same and the 2 on the ends are the same so how can that be confusing
i have never work on one but i can read a parts diagram
you bought new Orings and new screws and you selected shims that are 8 x 14 x 0.5mm and a standard shim would be a 8 x 14 x.0.4mm

so i am still puzzled put the Orings where the Orings go the hard parts can only go together one way and screw it together

you should be able to read a parts diagram
https://www.feinwerkbau.de/en/service/downloads/technical-information/exploded-drawings

 

[ricardocabralsousa]

you have 8 washers
6 in the middle are all the same and the 2 on the ends are the same so how can that be confusing
i have never work on one but i can read a parts diagram
you bought new Orings and new screws and you selected shims that are 8 x 14 x 0.5mm and a standard shim would be a 8 x 14 x.0.4mm

so i am still puzzled put the Orings where the Orings go the hard parts can only go together one way and screw it together

you should be able to read a parts diagram
https://www.feinwerkbau.de/en/service/downloads/technical-information/exploded-drawings

O ordered what I saw on exploded diagram…it Will work with what I ordered?
Thank you