Anyone using it on a .22 or .25? I’m buying a 40-50 FTLB .25 without a shroud. I’d like to quiet the muzzle blast down to about the noise level of a mid powered spring piston gun. Might this be achievable with the Emperor?
Thanks!
Thanks!
Donny FL Emperor Small Bore?
- Thread starter forrest342
- Start date
A emperior works great...IF you are only at 50 ft pounds i dont think you need a emperior...Im at over 100 ft pounds 22 cal and smaller moderators work okay for me..
Upvote 0
I've used a Sumo with great results on 25s and 22s in that power range. I never wanted to try and Emperor, just to big. I have wanted to try a Ronan but never have.
Upvote 0
Sumo 25
On challenger pro, shrouded but it's non functional. Worked really well.
TalonP, 22 and 177. No shroud. Worked so good I bought a 177/22 for the TalonP in .177 w/ 18" barrel, shoots 20gn slugs at 900
P12 in 22 with working shroud worked but was expecting more.
Kral Empire XS and Puncher Breaker. Same as the P12
I find it depends on the gun & tune. Some instances it seemed to make the report louder. Sometimes it changed the tone compared to other cans.
On challenger pro, shrouded but it's non functional. Worked really well.
TalonP, 22 and 177. No shroud. Worked so good I bought a 177/22 for the TalonP in .177 w/ 18" barrel, shoots 20gn slugs at 900
P12 in 22 with working shroud worked but was expecting more.
Kral Empire XS and Puncher Breaker. Same as the P12
I find it depends on the gun & tune. Some instances it seemed to make the report louder. Sometimes it changed the tone compared to other cans.
Upvote 0
Cool, thanks. I already have a DonnyFl Shogun. It’s only slightly quieter than my Huggett Snipe on my FX Crown despite being much bigger. I’ll wait to see how it works on the FX DRS before I upgrade.
Upvote 0