Anyone familiar with putting a DonnyFL on a Texan Carbine?
Does the factory shroud need to be modified, or will Donny adapted fit as is?
Does the factory shroud need to be modified, or will Donny adapted fit as is?
DonnyFL on Texan Carbine
- Thread starter BrendanM
- Start date
I have the same question, I would like a nice clean shorter moderator on my gun. The SS model shroud I think is pretty ugly.
wll2506
wll2506
Upvote 0
I have a donny on my 308 non ss carbine..buy I tread the barrel m14-1 so I could use a shogun or ronin on mine..I always tread the barrel..adapters almost always bring clipping problems.
Upvote 0
I put a Ronin on my Condor.25
It just ain't enough, Airforce rifles need at least an Emporer in my experiences with.
It just ain't enough, Airforce rifles need at least an Emporer in my experiences with.
Upvote 0
I don't se the use of a emperor in almost any rifle except the bulldog..to big to heavy , producing bad harmonics in long barrel rifles..it simply looks ridiculous...in my 2 hp texan .257 - 308 I use the shogun and is enough even for indoor tests..if I need them any quieter than that, then I should not be shooting bullets in that place..this years will give my self a .457-CF. let's se what will take that one to make it indoor friendly...but you be sure I'm not be using a emperor... in my 2 HP condor .223 - .257 I use the sumo .. but if I'm out side I prefer the donny FX moderator working as air striper..and I use them all for the expesific caliber..
Upvote 0
You read to much internet
You have no experience clearly
Facebook talking points dont work here.
Friendly FYI
Upvote 0
Donny does sell an extension for the Ronin. That way you can choose the level of suppression you require; either take the bark out or add extension to muffle it down a few decibels. I don't own an Emp so I can't say how it compares to it but on my .357 the extension does make a difference if silence is my goal.
Upvote 0
I have the Ronin on my .257 and it helps alot, but if you really want it alot quieter add the extension. It's only $60 and you can attach it to the new Ronin. That way you have the best of both and you are not just stuck with that big honking Emporer.
My .457 is the LSS CF and I will leave it as is.
Upvote 0