Don't feel left out!

[thammer]

Troy, what's the barrel OD for these?

It will come in multiple sizes. 7/16", 1/2", 14mm for sure though.

Good to know! Thanks. Any 15mm by chance? I know TJ does do there .22 airgun barrels in 15mm also.

As long as they can forge it that thickness they'll be available. 

 

[Cranky1]

I’m hoping these are a big hit, I would like a 500-600 mm 22 cal for my Leshiy2. The fx style would work fine since I’ve got the sub12 adapters. 1/2x20 for a can. 

 

[Jasonmc]

NICE!! I would be interested in a 15mm. 

 

[heavy-impact]

Sounds like a winner and exactly what the market needs. Which guns do you plan drop in barrels for ?

 

[thammer]

Sounds like a winner and exactly what the market needs. Which guns do you plan drop in barrels for ?

Everything I possibly can!... lol...obviously all Kral Family guns, Avenger/liberty Family. Those will likely be the first runs but will sell blanks to fit or make drop in barrels for most current brands and models including FX/Daystate/Brocock/AGT/Taipan. 

 

[Franklink]

I like the Taipan inclusion! 

 

[Dairyboy]

Maybe RTI?

 

[thammer]

Maybe RTI?

If I can get measurements I can get a drop in barrel. I'll get you covered. 

 

[Franklink]

Troy, I've got 3 unused Veteran barrels sitting on my bench. If you get to a point that borrowing one for duplication would be helpful I'd be more than willing to lend you one for a bit to make it happen. 

 

[Wr250r]

Where can I buy one when their available. 

 

[airdog]

This sounds real interesting. Willing to purchase an RTI version too please. 

 

[Dairyboy]

I can send my RTI barrel in as well if need be. It's pretty straight forward but wouldnt hurt.

 

[heavy-impact]

They have a 212 bore with 217 groove diameter.

Is the bore and groove surface area about equal? What slug diameter do you expect to work best?

 

[thammer]

They have a 212 bore with 217 groove diameter.

Is the bore and groove surface area about equal? What slug diameter do you expect to work best?

It's 70/30 70% being groove to reduce friction. Being .217 groove diameter I expect .217 or possibly .2175 to perform best. Went .217 to have the highest likelihood that pellets will shoot well too. 

 

[Dairyboy]

I had a different TJs 3 groove that was .214/.209 and was more like 33/66 than 50/50 bore to groove ratio. Could be different but I'd suspect not being it's to help cut down on the friction

Edit: Well I see Troy answered before I refreshed the page lol. I was close.

 

[heavy-impact]

It's 70/30 70% being groove to reduce friction. Being .217 groove diameter I expect .217 or possibly .2175 to perform best. Went .217 to have the highest likelihood that pellets will shoot well too.

Perfect, thanks for the detailed response. I can't wait to try one.

 

[Seeker]

I hope you will be able to send them to Europe.

 

[TerryE1]

A 350mm for my Leshiy Classic.

 

[thammer]

I hope you will be able to send them to Europe.

Working on it! 

A 350mm for my Leshiy Classic.

Noted! 

 

[Airgunmann]

I would like to try one on my pre air force raw hm 1000x to but it's a 25 cal hopefully that will be next