Don't feel left out!

[heavy-impact]

My very first 5 shot group from Troy Hammer's new barrel design.
.22 Avenger with a 24 inch barrel.
51 yards shooting .2165 NSA17.5 @950fps. That's a 1inch target dot.
Using a Swede high capacity mag. Shooting off an Atlas bipod and rear bag as I'm eaten alive by mosquitoes.
I think he has a winner.

 

[beerthief]

looks good you said a 1 inch target ? looking at apx.1/4 inch group , NICE !

 

[robertnadia84]

What was the cost for the barrel? Do you have photos of the rifle with it on? Man that’s temping

 

[woogie_man]

Still want one for my wolf. Lol

 

[heavy-impact]

What was the cost for the barrel? Do you have photos of the rifle with it on? Man that’s temping

You'll have to contact thammer who started this thread for a price.

 

[customcutter]

Anybody have a website or a link?

 

[heavy-impact]

Anybody have a website or a link?

PM the OP of this thread . thammer

 

[thammer]

Barrel cost is determined by length. 24" barrel drop in ready is $299 for most guns shipped. Add or subtract $6 per inch.

 

[customcutter]

Barrel cost is determined by length. 24" barrel drop in ready is $299 for most guns shipped. Add or subtract $6 per inch.

In an earlier post you said $150 for an "un-finished" barrel?

 

[heavy-impact]

looks good you said a 1 inch target ? looking at apx.1/4 inch group , NICE !

Measures .395" outside to outside so if I have my math right that's .1785" center to center. I'm quite chuffed to say the least.

 

[robertnadia84]

Barrel cost is determined by length. 24" barrel drop in ready is $299 for most guns shipped. Add or subtract $6 per inch.

Thanks for the reply

 

[thammer]

In an earlier post you said $150 for an "un-finished" barrel?

Again depending on length but yes raw blanks will also be available.

 

[thammer]

Material cost and shipping keep increasing so prices will have to reflect the market.

 

[rsfrid]

My very first 5 shot group from Troy Hammer's new barrel design.
.22 Avenger with a 24 inch barrel.
51 yards shooting .2165 NSA17.5 @950fps. That's a 1inch target dot.
Using a Swede high capacity mag. Shooting off an Atlas bipod and rear bag as I'm eaten alive by mosquitoes.
I think he has a winner.
View attachment 297933

What's your reg set at?

 

[heavy-impact]

What's your reg set at?

Looks like it's about 2450. I must have bumped it up a little but I don't recall doing it.
There's no porting right now but I plan to open the ports a little and add a good sized plenum.
All my other ammo was larger diameter and shot much slower and less accurate I have more slugs coming in .2165 diameter.
Hades pellets shot pretty good 985fps with no scope adjustment. This is not a choked barrel.

 

[Franklink]

Just got one of Troys 3 land TJ barrels installed.

.22 and 28 inches long Currently on a Standard (my project Veteran platform) but if it proves worthy it'll go on my Long with a couple plenums and not look so disproportionate. Really hoping it'll launch the MRDs accurately and 950+ but will also test some slugs.

Vet Short in photo for perspective.

 

[Bocephus]

Any update on when these are available? I’m starting to feel left out.

 

[customcutter]

Any update on when these are available? I’m starting to feel left out.

Available now in .22. DM thammer.

 

[heavy-impact]

My new slugs arrived from NSA. Hope to get more testing done tomorrow evening when there's no wind.

 

[Bocephus]

Any updates from the guys who were able to obtain one of these barrels?