Just right and just in time for squirrel season.
This resin printed moderator is 30.5mm (1.2") x 89.9mm (3.62") and 1.75 ounces (49.6 gm).
It is almost exactly the same size as a Huggett Atom. It weighs 1/3 less and it is rated at 35 fpe.
I've tested it on my Stormrider and was shooting one ragged hole at 25 yards with no wind.
If your gun will do it, this moderator will do it.
1/2 UNF threads printed (no steel insert)
177 caliber
$40.00 to your door.
This moderator contains 3 baffles. It can not be disassembled. Cleaning is accomplished by soaking in warm soapy water, threaded end up over night. Generally this is done by my testers every few thousand rounds. Particularly egregious fouling could be removed with any household cleaner as the plastic is not sensitive to reasonable use of acetone and/or denatured alcohol.
CONUS only.
I will ship outside of CONUS but we will have to work out that price.
PayPal only. I will send you an invoice after I have your email address.
Money back upon return if you are not pleased for any reason.
Contact me for return postage if necessary.
Last edited:
