Dreamline amp reg o-ring

[Scroooface]

My dreamline has had regulator creep but it didn't really bother me much as it was only about 10 bar over where I had the reg set.. now it's matching the bottle pressure which is way over.. I looked on YouTube and seen that it could be the reg screw o-ring.. so when I went to check it, this time I had a leak.. filled the bottle back up and heard all the air coming out.. I put my finger over the reg screw housing and all the air was coming out.. I removed the screw and the orings are damaged... Does anyone have these orings or know where I can get them from?? Kinda frustrating because I just grabbed one of my other guns and now both of them have leaks also.. have to find out where the leak is on those as well...

 

[Impact701]

My dreamline has had regulator creep but it didn't really bother me much as it was only about 10 bar over where I had the reg set.. now it's matching the bottle pressure which is way over.. I looked on YouTube and seen that it could be the reg screw o-ring.. so when I went to check it, this time I had a leak.. filled the bottle back up and heard all the air coming out.. I put my finger over the reg screw housing and all the air was coming out.. I removed the screw and the orings are damaged... Does anyone have these orings or know where I can get them from?? Kinda frustrating because I just grabbed one of my other guns and now both of them have leaks also.. have to find out where the leak is on those as well...

View attachment 522783

They should be 2x1 NBR 90

Buna 90 O-rings 2 x 1mm Minimum 25 pcs

3mm ID x 5mm OD x 1mm CS-Price for 50 pcs

www.oringsandmore.com

 

[Joedirt199]

Buy a bunch and soak them in warm water. You will break a bunch of them trying to slide them into position. Chuck that adjuster into an electric drill and use some micron cloth to break the sharp edges so they are less likely to cut the new orings.

 

[Scroooface]

They should be 2x1 NBR 90

Buna 90 O-rings 2 x 1mm Minimum 25 pcs

3mm ID x 5mm OD x 1mm CS-Price for 50 pcs

www.oringsandmore.com

I appreciate the information.. I ordered them and installed both.. now no reg creep and no more leaking... They don't measure 5x3x1... Outside is 4mm.. I don't know where those numbers came from.. either way, they're in there and working.. now onto my impact to find the leak... Thanks again

 

[Scroooface]

Buy a bunch and soak them in warm water. You will break a bunch of them trying to slide them into position. Chuck that adjuster into an electric drill and use some micron cloth to break the sharp edges so they are less likely to cut the new orings.

I got them on just by sliding them over the end.. first one went on good, second one broke and I didn't see it... Installed it and it was leaking.. removed the screw and used a loop and saw the top one was broken.. I lubed up another and slid it over.. reinstalled an now we are good to go.. I appreciate the help

 

[Impact701]

I appreciate the information.. I ordered them and installed both.. now no reg creep and no more leaking... They don't measure 5x3x1... Outside is 4mm.. I don't know where those numbers came from.. either way, they're in there and working.. now onto my impact to find the leak... Thanks again

View attachment 523777

That seems to be the wrong description !
I'm glad to here you got your rifle fixed !