DYI Fill Station

[FLgunner]

I have a ½ Liter, 300 BAR Aluminum Bottle from an old Gauntlet I no longer have and was wondering if it could be made into a small fill station for use with my Notos and Jet airguns?

It has an inline regulator that is currently set at 2200 psi. Can the Belleville washers or spring (I don't recall which is installed) be removed so the the pressure leaving is the same as in the tank?

I have a Ninja Valve that is rated to 4500 psi, a short fill whip and an AliExpress knock off Eazy Fill I can attach to it that will bleed off pressure after filling the gun. I'm just curious if I can adapt this to that purpose, or do I need a different part to replace the regulator? Thanks for the help.

 

[Firewalker]

I have a ½ Liter, 300 BAR Aluminum Bottle from an old Gauntlet I no longer have and was wondering if it could be made into a small fill station for use with my Notos and Jet airguns?


View attachment 515252

It has an inline regulator that is currently set at 2200 psi. Can the Belleville washers or spring (I don't recall which is installed) be removed so the the pressure leaving is the same as in the tank?

View attachment 515253

I have a Ninja Valve that is rated to 4500 psi, a short fill whip and an AliExpress knock off Eazy Fill I can attach to it that will bleed off pressure after filling the gun. I'm just curious if I can adapt this to that purpose, or do I need a different part to replace the regulator? Thanks for the help.

I bought the fill stations off of Amazon for about $40 each, the knockoff EaZy fills were $22 each.

Perfect for the bench or on a hunt.

 

[FLgunner]

Is this the one you got?

Amazon.com

 

[SilentSquirrel]

Hello @Firewalker
I've searched Amazon and have not found the EaZy fill clones
Would you happen to have a link, please?
Thanks
Edfward

 

[Firewalker]

Is this the one you got?

Amazon.com

Looks to be the same idea!

 

[Firewalker]

Hello @Firewalker
I've searched Amazon and have not found the EaZy fill clones
Would you happen to have a link, please?
Thanks
Edfward

I found them on Aliexpress for $22 each.

 

[Gerry52]

How are the Aliexpress easy fills working out for you? I'm assuming you're referring to the thumb lever gizmos that connect to your fill foster. Looked at others but their price p-ssed me off. Lmk, please.

 

[SilentSquirrel]

Gerry
Here is a link I just ordered from .
They are $27, shipped free

There are others, but a double the price

Edward

https://www.aliexpress.us/item/3256807706629181.html?spm=a2g0o.productlist.main.23.75acwxfnwxfnKr&algo_pvid=c85a6714-ab29-47f5-abf9-e53d43c2da69&aem_p4p_detail=202411241353249639701621541300002390461&algo_exp_id=c85a6714-ab29-47f5-abf9-e53d43c2da69-11&pdp_npi=4%40dis%21USD%2153.92%2126.96%21%21%2153.92%2126.96%21%402101c80017324852045823520e5c32%2112000042743624088%21sea%21US%212023346561%21X&curPageLogUid=whyUPeZg0fEL&utparam-url=scene%3Asearch%7Cquery_from%3A&search_p4p_id=202411241353249639701621541300002390461_3

 

[Firewalker]

Here is a link:

https://www.aliexpress.us/item/3256807419972894.html?spm=a2g0o.order_list.order_list_main.27.361f1802gF42Df&gatewayAdapt=glo2usa

These do take a little tweaking to get working well. I took them apart, used o-ring silicone oil on all parts, reassembled and adjusted the grub pushing down on the pin deeper to the point of almost popping the valve open for the best operation.