FX Dynamic Express 700 in .25 just getting started

Hey fellow AGN members,
I am a long time Crown .25 pellet shooter and after my uncle gifted me with an Express, I want to start shooting slugs. First and foremost, I am a hunter and part time home range shooter. I haven't a clue what I am doing tuning for slugs. Uncle had it set @150 BAR. He had the Macro wheel set way up. I took that back to the 13 recommended setting. for starting. Been tinkering with various weights and brands of slugs. I would like input from you all on your favorite slug and settings. I would like also like two to three clips or more worth of shooting. This platform is heavy enough taking even a pony tank of air is not feasible for a long walkabout in the field or woods. I know how accurate my crown is with pellets. @ 50 yards shoot a single ragged hole. I know slugs are better suited for longer ranges but can I expect the same with slugs? Thanks,

Marty
 
hello, I also have Dynamic in .25 and 700mm. the first thing I would like to point out is that the macro does not say anything about where it is set. all that matters is the micro setting. As for slugs or pellets, I personally use pellets even at 100 meters, but if you want to shoot really accurately, then slugs are used for everything else up to 70 meters. pellets jsb king heavy MK2 2.2 grams regulator pressure 125 bar, micro setting with 8mm hammer (13.2 grams) is 1.5-1.7 depending on the speed you need. slugy basic Zan 41 grain 140 bar micro I set 2.3-2.8 according to speed, 50 grain 145-150 bar micro 3-3.2, NSA 55.5 grain 170 Bar micro 3.8-4
 
  • Like
Reactions: Newmember1958
hello, I also have Dynamic in .25 and 700mm. the first thing I would like to point out is that the macro does not say anything about where it is set. all that matters is the micro setting. As for slugs or pellets, I personally use pellets even at 100 meters, but if you want to shoot really accurately, then slugs are used for everything else up to 70 meters. pellets jsb king heavy MK2 2.2 grams regulator pressure 125 bar, micro setting with 8mm hammer (13.2 grams) is 1.5-1.7 depending on the speed you need. slugy basic Zan 41 grain 140 bar micro I set 2.3-2.8 according to speed, 50 grain 145-150 bar micro 3-3.2, NSA 55.5 grain 170 Bar micro 3.8-4
Thank you, sir. Just really need some basic ideas to get started.