Ebay Avenger internal Moderators?

[recondoc]

Has anyone tried one of these PETE 3D Printed internal moderators for the Avenger? I bought one that has about a 3" extension past the existing end of the barrel.

Hoping it works OK. Very nervous to add an adapter and screw on type mod due to having 2 full paperwork cans for my conventional stuff and not wanting to end up under the intense scrutiny of our Fed Govt when I have more than those on hand should I get audited.

Let me know if your tried one and how it worked out for you.

Thanks,

Doc

 

[DesertSilver]

I've got one from Geo in my liberty which is a older brother to the avenger. It really quites it down even though it's putting out around 45 fpe. You can buy one through airgun universe. When I bought mine it was$25 . I did have to sand the inside where it slides over the barrel but not much.

 

[recondoc]

Appreciate the info. I'll definitely check mine for fit and finish when it arrives to see if I have to do similar sanding. I paid 30 for this one off of ebay. It fits the Avenger front shroud threads and then sticks forward about 4". That makes it about 7" worth of moderator overall with the other 3" or so inside the shroud.