EDgun Leshiy 2 Slug Magazine .177/4.5mm

[BlackTitanium]

Here is an illustration of how .177/4.5mm slugs fit into the EDgun Leshiy 2 Slug Magazine.

The 13.4 gr slugs drop right into place, just slightly proud, and become fully seated when the magazine plate is attached.

The 20 gr slugs require a bit of thumb pressing force, followed by a final seating by pressing the magazine plate on each slug, to seat the slugs into the magazine.

The 13.4 gr Slugs will partially protrude from the bottom of the stock magazine, as pictured below.
The 20 gr Slugs, will mostly drop right through the stock Magazine.

 

[rigbymauser]

Thanks for sharing.

I had the "hots" for a Leishy 2. Glad I didn`t get one. No more "hots"...

Can you hit anything with 20grain slugs?...H&N or ZANs....power?..

 

[BlackTitanium]

Thanks for sharing.

I had the "hots" for a Leishy 2. Glad I didn`t get one. No more "hots"...

Can you hit anything with 20grain slugs?...H&N or ZANs....power?..

 

[rigbymauser]

I`m a ZANman too..Works best in the Daystate Revere.

Whats best in the L2?..H&N or the ZANs?.. Nielsen 20,5grain?...

 

[BlackTitanium]

I`m a ZANman too..Works best in the Daystate Revere.

Whats best in the L2?..H&N or the ZANs?.. Nielsen 20,5grain?...

H&N, ZAN and NSA, for my close quarter backyard pest control, all shoot the same hole in hole accuracy.

The NSA slugs don’t completely fall through the standard magazine, and work great with the speed loader.

Except for the 13.4 gr JSB KnockOut Slugs all of the 20 gr slugs, sit proud, do not drop into the Slug Magazine, and require a significant amount of force to seat the slug into the magazine. This doesn’t seem like a good practice, and feels like I’m damaging the slugs and or the magazine.

The need to push the slugs into the Slug Magazine defeats 50% of the purpose of using the speed loader.

At this point, I prefer to use the NSA slugs with the standard L2 Magazine.