EDgun Edgun Leshiy 2

I’ve been shooting my new Leshiy 2 with a red dot since I got it. Today I put a nice scope on it and this is the first group I shot at 50 yards after sighting it in. You can see my sight in shots in the middle then I dropped down to the right target and shot this group. This weekend I will take it out to 100 yards. It is a 30 cal 350barrel shooting JSB 44.75 pellets at 840fps.
82B2F306-D0AE-49DB-9F43-59E091246A94.1619059705.jpeg


26717281-0D03-4AB5-8288-F5CD83954D73.1619059464.jpeg

 
I’ve been shooting my new Leshiy 2 with a red dot since I got it. Today I put a nice scope on it and this is the first group I shot at 50 yards after sighting it in. You can see my sight in shots in the middle then I dropped down to the right target and shot this group. This weekend I will take it out to 100 yards. It is a 30 cal 350barrel shooting JSB 44.75 pellets at 840fps.
82B2F306-D0AE-49DB-9F43-59E091246A94.1619059705.jpeg


26717281-0D03-4AB5-8288-F5CD83954D73.1619059464.jpeg

I'm guessing you're a satisfied camper, too, if I can mix metaphors 👍

What jets and reg settings got you there? Very nice shooting. My L2 is capable of the same 🤘
 
I’ve been shooting my new Leshiy 2 with a red dot since I got it. Today I put a nice scope on it and this is the first group I shot at 50 yards after sighting it in. You can see my sight in shots in the middle then I dropped down to the right target and shot this group. This weekend I will take it out to 100 yards. It is a 30 cal 350barrel shooting JSB 44.75 pellets at 840fps.
82B2F306-D0AE-49DB-9F43-59E091246A94.1619059705.jpeg


26717281-0D03-4AB5-8288-F5CD83954D73.1619059464.jpeg

I'm guessing you're a satisfied camper, too, if I can mix metaphors
1f44d.svg


What jets and reg settings got you there? Very nice shooting. My L2 is capable of the same
1f918.svg

Very Satisfied.....When I first got the gun it was only shooting 675fps. I called Brian at Edgun West and he told me to turn up the reg 15 minutes. He also said to take one jet out and plug the whole with a screw. This is the result. Based on our conversation I believe I have the reg set at 145 bar with a .6 jet and a plug. I just purchased a reg tester and a hole set of jets. I should have them by next week. I will post actual numbers when I verify next week.


I purchased the reg tester and jets so I could fine tune it to get shooting tight groups. After today I think it would be dumb to mess with it.....lol


Chris
 
I’ve been shooting my new Leshiy 2 with a red dot since I got it. Today I put a nice scope on it and this is the first group I shot at 50 yards after sighting it in. You can see my sight in shots in the middle then I dropped down to the right target and shot this group. This weekend I will take it out to 100 yards. It is a 30 cal 350barrel shooting JSB 44.75 pellets at 840fps.

Great trigger work, awesome group!
 
I didn’t need to change out the pin for my Leshiy 2. I went with a much easier approach. There are 2 8x10x1mm washer (#6) on both side of the latch already so I added another washer next to #6 as shown to give another .25mm or 1mm depending on which handguard I will be using. Simple fix. I 3D printed the extra washer. 

Steps are as follows; 

1) unscrew #16 but DON’T remove the screw

2) pull out #12

3) add extra washer next to #6 circled in red

4) reassemble #12 and screw back #16 together 

done 

D0BDEC33-E205-4805-9CA6-F6F5CE312F8A.1616734213.jpeg


B217140D-0534-4B5A-97AC-AB1E41330FC5.1616717373.jpeg

E08B6690-5BCC-4869-B177-A1352CBC177A.1616717399.jpeg

edited with step by step instructions

Looks like Ed gave my locking mod a blessing . 😜



9573EE08-E839-46F9-8523-D802BB0761C4.1619189743.png

 
  • Like
Reactions: Cattoo
Dang, I need this for the 350cc bottle that I'm waiting on. I'm betting it didnt come with it tho :(


Also, DO NOT take the #4 housing out, getting 7 & 8 inside of it and put into 3 is a major f'n pain in the ass. If you somehow took it apart on accident, just take your time and pay attention to how it all works. That's how I finally got mine on.
D0BDEC33-E205-4805-9CA6-F6F5CE312F8A.1616734213.jpeg

 
hmm, im thinking the bottle is longer/narrower than the 300cc bottle people are having issues locking? Thanks for the input from those with the 350!!!!

Edit: I had to do some adjusting because the top cylinder was easily rotating. Removed the rubber grommet to tighten down the top, first adjusted so there is like 1mm of space between bottle and trigger guard.
 
I am selling my barely used .30 caliber Edgun Leshiy 2. Comes with the 300cc air tank installed ($300 value), original air tank, 2 + 1 extra magazine ($90 value), fill probe, 2 magazine holders, everything seen in the picture. Used only a few times, I've only had it for about 1 month and will come in it's original box. Only reason for selling is I just ordered a Daystate Delta Wolf and recently got an FX Maverick compact.

Price: $2,500 for everything seen in the picture. Will ship free within contiguous USA. PayPal for payment. Please see classifieds for pictures.
 
I haven't done anything scientific in terms of barrel swaps, but I did try a .22 250mm and 350mm setup and I recall a 50-60fps difference.

Been trying out a few NSA .25 slugs. With single 0.4mm nozzle / 160 bar reg / .25 450mm barrel I'm getting ~880 fps with the 38.9 .250 slugs. Nothing longer distance yet but showing some promise. I'm going to see if I can get them going up over 900 as slugs seem happier out of the Alfa barrel around 930-950fps. 

Should get some of the 36.2 gr slugs in today or tomorrow. Should be a bit easier to get those in the mid 900s. 
 
I was looking at purchasing the NSA 36.2gr slugs, since they are one of the few slugs and pellets available in .25 I can find in stock. How do the NSA slugs fit in the magazine and are you getting a consistent velocity with them. I started testing the JSB knockouts, shooting out to 40 yards’ like most slugs on other than the AVS’s they will fall out of the magazine but they seem to be pretty accurate.