There is no automatic shot, you need to fold the goblin and unfold, then you can make 1 shot. The semiautomatic device does not work.
Upvote 0
EDgun Edgun Leshiy 2
- Thread starter Navnesen
- Start date
Good and bad to hear. I have the 1st gen 3x Spitfire on my 300blk and have really enjoyed it. I expect the newer version to be even better.
I am sure that I will see what you’re talking about in a couple of days, but if you have a pic handy I would like to see. Maybe I can find a solution before the Leshiy 2 gets here.
Upvote 0
This lever is too close to the pic rail -- you can't mount something above the top rounded portion.
sorry @traxx I tried to post pictures but they didn't take
Upvote 0
Thanks, I am still trying to get my avatar changed soooooo, I kinda get it. LOL.
Well, She should arrive tomorrow and the optic today. I have 2 bottles charged to 300bar, targets ready and a fresh cut shooting lane ready.
Well, She should arrive tomorrow and the optic today. I have 2 bottles charged to 300bar, targets ready and a fresh cut shooting lane ready.
Upvote 0
Fwiw I was able to shoe horn the Spitfire 5x on in a semi workable position.
Reverse the mount from how it comes (you want the fixed portion of the mount on the left side of the L2 and the loose portion of the grabber on the right side.) The loose grabber portion is a MM or so more narrow and on my gun it JUST fits.
However... the release lever is now VERY stiff and I suspect keeping it this way long term would wear out the locking mechanism both on the open and on the close.
100% convinced that very modest sanding on the release lever would fix this though.
@edgun should redesign this part (the plastic lever) IMHO -- it's a minor but annoying design flaw. Guessing it's an injection mold though, so redesign is unlikely.
Upvote 0
So, is being unable to latch the break over effecting the operation? Or is it just for stowing or transport?
The only time that I would have it folded over would be during transport. Once in the fields she will be hanging on a single point sling or on a hook in the tractor cab.
For transport, I am thinking a pelican case with foam. Hopefully small enough to fit in my saddle bags on the Electra Glide. If needed I can strap to the luggage rack.
The only time that I would have it folded over would be during transport. Once in the fields she will be hanging on a single point sling or on a hook in the tractor cab.
For transport, I am thinking a pelican case with foam. Hopefully small enough to fit in my saddle bags on the Electra Glide. If needed I can strap to the luggage rack.
Upvote 0
@traxx
I went ahead and every so slightly sanded down the top of the lever (there was a minor mark where it had been hitting the bottom of the rail mount.) VERY minor sanding.
I can get the vortex all the way back on the rail now, lever / locking and unlocking works perfect and eye relief is solved.
If you end up having to do this, be careful. There a spring inside the lever under tension.
I went ahead and every so slightly sanded down the top of the lever (there was a minor mark where it had been hitting the bottom of the rail mount.) VERY minor sanding.
I can get the vortex all the way back on the rail now, lever / locking and unlocking works perfect and eye relief is solved.
If you end up having to do this, be careful. There a spring inside the lever under tension.
Upvote 0
Anyone else wondering what changes were made to the R.E.P.R version? Seems like there’s very little information. I see the new grip but surely that can’t be the only change . I thought I read about an externally adjustable regulator , maybe I was just wishing .
Upvote 0
Curious about this as well. Don't particularly want to splash more cash out on this gun but there are some convenience features I would do it for (external reg adjustment being the primary.)
Upvote 0
From what I understand, it includes an external regulator adjuster. I've been told more news on this coming next week.
Upvote 0
I had been spending a lots of time shooting these two guns between Leshiy2 and my all-time favorite Huben K1. Both semi-auto and fun to shoots. I'm going to leave my Huben as a slugs gun and L2 as a pellets shooter. Check out JSB HADES 26.54gr at 50yards. Reg pressure set at 160 bar, one .02jet and other closed off, shooting about 960fps.
Upvote 0
Nice numbers and grouping with that speed.
Is that with a 350 mm barrel?
How many shots do you get out of that little tank?
Upvote 0
I have been searching this forum for ages, but cannot find an answer, so i'll just shoot:
Does anyone have any luck with slugs from a 350mm .22 Lothar Walther barrel?
If so, what weights/dimensions/types are you having luck with and with what kind of settings?
Pellet wise I have had most luck with H&N Barracuda Match , but i have to keep them in the 800's or else the grouping opens up dramatically. I would really like to try some slugs as i know this gun can be pushed a little further energy wise, and the extra BC of slugs is nice.
Thanks, sorry if someone already posted this somewhere but i cannot find it...
Does anyone have any luck with slugs from a 350mm .22 Lothar Walther barrel?
If so, what weights/dimensions/types are you having luck with and with what kind of settings?
Pellet wise I have had most luck with H&N Barracuda Match , but i have to keep them in the 800's or else the grouping opens up dramatically. I would really like to try some slugs as i know this gun can be pushed a little further energy wise, and the extra BC of slugs is nice.
Thanks, sorry if someone already posted this somewhere but i cannot find it...
Upvote 0
Looks like I found out what the LESHIY 2 REPR is all about. Just had to lift up her skirt to find out!
This is my second Leshiy 2, the Hornet 25 cal edition. Topped off with a thermal ATN scope.
That appears to be an externally adjustable regulator. Some little birdie told me it’ll adjust from 60-280 bar without having to bleed off the system.
I think this is what Ed was referring to when he said he’d be constantly innovating and upgrading the Leshiy 2 platform.
This is my second Leshiy 2, the Hornet 25 cal edition. Topped off with a thermal ATN scope.
That appears to be an externally adjustable regulator. Some little birdie told me it’ll adjust from 60-280 bar without having to bleed off the system.
I think this is what Ed was referring to when he said he’d be constantly innovating and upgrading the Leshiy 2 platform.
Upvote 0
Foxbow, I would suggest getting a sample pack from NSA to start. This will get you in the ball park and see what YOUR gun likes . Once you figure out the best performing size and weight, start tuning your gun to have them shoot at their best. In .22 caliber I’d start with weights between 18 and 25 grain.
Upvote 0
I don't get the secrecy from them on the nice upgrades, why not just say it - if you're going to spend over $2k, we need more details. It's kind of frustrating.
Upvote 0
The million $ question for me is will this be available as an upgrade part for all of us that already have a Leshiy 2
Upvote 0
Foxbow,
It's a .25cal, 350mm Alpha Precision barrel. I'm getting about four magazines from 300bar fill.
Furthermore, this gun shoots slugs pretty well. However, I have to set the regulator at 170bar and shoot VK 32.8grs around 900-910fps. A friend of mine has the same setup and shooting NSA 29.5 grs around 940 fps with very good results. The reason my gun is tuned to shoot pellets now cause I'm running low on slugs, plus I have about 7cans of pellets to mess with.
It's a .25cal, 350mm Alpha Precision barrel. I'm getting about four magazines from 300bar fill.
Furthermore, this gun shoots slugs pretty well. However, I have to set the regulator at 170bar and shoot VK 32.8grs around 900-910fps. A friend of mine has the same setup and shooting NSA 29.5 grs around 940 fps with very good results. The reason my gun is tuned to shoot pellets now cause I'm running low on slugs, plus I have about 7cans of pellets to mess with.
Upvote 0
I wonder why the new version would have an externally adjustable reg but not have a gauge for the reg preasure? The English chap on UTube has made a plenum with an external gauge . Put both together on the Leshiy and then I would buy the part to upgrade mine. But if it is only the external reg adjustment I’ll wait. I only plan on changing my reg two times a year when going between .30 and .22. A gauge for the reg pressure is more important to me.
Upvote 0