EDgun Edgun Leshiy 2
- Thread starter Navnesen
- Start date
An appropriate size Belleville would allow a little preload on closing of the action to insure foreword most position of extended puck.
Dave
Dave
Upvote 0
You probably don't want that, though. When the gun isn't firing you don't want any pressure or friction on the magazine, to ensure the cycling mechanism works.
Upvote 0
This is only talking about shooting without a magazine. Single load with an extended puck.
Dave
Dave
Upvote 0
I’m not arguing for or against it. I only suggested it as a way to shoot ss.
I can see the advantage with an extended puck in that it requires no modification to the gun and you can simply pull the puck and go back to a mag easily.
Dave
I can see the advantage with an extended puck in that it requires no modification to the gun and you can simply pull the puck and go back to a mag easily.
Dave
Upvote 0
Hey guys looking to buy a .2 and or .5 jet for my L2. I would order it from Spain but right now is like 9 euro and 20 euro for shipping so looking for a seller in the USA.
Upvote 0
Shipping from Spain is relatively cheap, when you consider that it is International Express shipping.
Just go to any shipper and calculate what it would cost you to ship anything International Express.
We’re so spoiled by free shipping!
Upvote 0
Thanks, it cost 9 Euros to buy to jets and 36 Euros to ship it to the US right now at the Edgun Store.
Upvote 0
Spain asked me 96 euros to Canada envelop or box (and this where I dropped the F bomb), so you are still good for 36.
Upvote 0
Lol yeah it’s a bit much but looking at the big picture it’s only 50 bucks towards an airgun costing over 2k right
Upvote 0
I tried something new and had my L2 .177 with Valkyrie 150mm rail and Dedal scope Cerakoted in Magpul FDE.
And Because the Behemoth is somewhat delayed I used the Huma QDM for the perfect Huma MOD50 moderator.
Disassembled all fits in a small Peli Storm iM2300
And Because the Behemoth is somewhat delayed I used the Huma QDM for the perfect Huma MOD50 moderator.
Disassembled all fits in a small Peli Storm iM2300
Upvote 0
How is the noise level? Does the mod 50 attached directly to the barrel quieten it down enough?thanks.
Upvote 0
No my total bill as 4k, speed loader, some slugs, new grip, 100 down for the behemoth. ;-)$3.9K was at my place a year agoso you just don't cry
Upvote 0
very nice is that a harbor freight case?I tried something new and had my L2 .177 with Valkyrie 150mm rail and Dedal scope Cerakoted in Magpul FDE.
And Because the Behemoth is somewhat delayed I used the Huma QDM for the perfect Huma MOD50 moderator.
Disassembled all fits in a small Peli Storm iM2300
Upvote 0
Yes it does a very good job quieting things down. I now use the Mod50 with 4 chambers and QDM. Obviously the L2 mechanism now makes the most noise. My L2 is .177 and the mod50 starts at .25 but even 5hen it works perfect with it’s large volume.
Upvote 0
I tried something new and had my L2 .177 with Valkyrie 150mm rail and Dedal scope Cerakoted in Magpul FDE.
And Because the Behemoth is somewhat delayed I used the Huma QDM for the perfect Huma MOD50 moderator.
Disassembled all fits in a small Peli Storm iM2300
Love it! Is that a 350mm bbl?
Upvote 0
Huh? Mine was 3200 (Canadian) taxes and shipping in.$3.9K was at my place a year ago
Upvote 0
From AGS my Leshiy 2 was $3469.14, including taxes and shipping.
Before taxes and shipping it was $3229.95.
Upvote 0