EDgun Edgun Leshiy 2

[delooper]

I assume when they made the jets and which size didn't passed the QC, either the engraving or the drilling didn't match, we call these "misslabeled"
Why to throw away if still working? And btw people will start swapping them around very soon, anyway

Yeah, that sounds likely. But I'd think they'd add the label after they're sized and pass QC. But what do I know about manufacturing processes.

 

[VINTCV]

It's 0.4 from the inside, i tried putting through a 0.45 wire it couldn't go through

The hole from the other side is the correct size not from the top side

 

[bigHUN]

What came with the L2 the sizes were off, but when I purchased the entire jets kit all were correct as engraved.
Get yourself a kit of these small micro drill bits and you can check yourself.

 

[VINTCV]

Is the L2 fill probe proprietry to only Edgun or is there any cheaper alternatives?

 

[delooper]

Is the L2 fill probe proprietry to only Edgun or is there any cheaper alternatives?

It looks like this fill probe does the Leshiy, Matador, Leyla and Veles. So Edgun-only.

EdGun Matador R3 R3M Lelya Veles Leshiy Probe + 10 x Free Orings | Eaglevisioncam

Replacement filling probe for: EDGUN MATADOR R3, R3M EDGUN LELYA EDGUN LESHIY EDGUN VELES This is a fully stainless steel Eaglevisioncam filling probe. It fits standard Best Fittings foster socket. Lifetime guarantee (O-rings are not included). Our quick release pockets and plugs fit only...

eaglevisioncam.com

I have it and it fits the Leshiy 2 so it must fit both Leshiys.

 

[VINTCV]

It looks like this fill probe does the Leshiy, Matador, Leyla and Veles. So Edgun-only.

EdGun Matador R3 R3M Lelya Veles Leshiy Probe + 10 x Free Orings | Eaglevisioncam

Replacement filling probe for: EDGUN MATADOR R3, R3M EDGUN LELYA EDGUN LESHIY EDGUN VELES This is a fully stainless steel Eaglevisioncam filling probe. It fits standard Best Fittings foster socket. Lifetime guarantee (O-rings are not included). Our quick release pockets and plugs fit only...

eaglevisioncam.com

I have it and it fits the Leshiy 2 so it must fit both Leshiys.

Thanks mate, item cost GBP15, shipping cost GBP32 , oops

 

[delooper]

Thanks mate, item cost GBP15, shipping cost GBP32 , oops

Yeah, the Edgun Spain shop, the smallest item shipping costs 150 EUR to Canada.

 

[candiru]

You can order Edgun stuff at www.airgunheaven.com in the Netherlands

 

[VINTCV]

What barrel is this? Alpha or Walther? on a .25 350mm L2

 

[candiru]

Walther, the Alfa has no markings

 

[Gerard]

My Leshiy 2's 350mm barrel is etched just behind the threads at the muzzle with 'Alfa Precision' - so it is certainly marked. Perhaps they are not all marked like this?

 

[VINTCV]

Are these barrel chocked? My L2 came from Russia

 

[VINTCV]

Walther, the Alfa has no markings

I doubt its AP or LW, this L2 came from Russia directly so I guess its their own barrel probably. Also i thought i seen videos that the barrel would have a c clip retainer but this one has a thick chamber instead of a c clip

 

[bigHUN]

I got 3 barrels from Russia pre-2022, mine are not choked.
Slug it?

 

[delooper]

My Leshiy 2's 350mm barrel is etched just behind the threads at the muzzle with 'Alfa Precision' - so it is certainly marked. Perhaps they are not all marked like this?

I've seen Alfa barrels that are unmarked as well.

 

[touaxiong]

By any chance, does anyone know what size the o ring is for the brass piece? TIA

 

[candiru]

Shooting pellets with slug mag?
I don't have a pellet mag. I feed the mag with a speedloader, I hate that the pellets don't fall in. Do they fit better in a pellet mag?

 

[GeneT]

Shooting pellets with slug mag?
I don't have a pellet mag. I feed the mag with a speedloader, I hate that the pellets don't fall in. Do they fit better in a pellet mag?

View attachment 446907

They drop right in in .22 & .25.

GsT

 

[Bowhunter73]

They fall right in my 25 and 30

 

[RIshooter]

Shooting pellets with slug mag?
I don't have a pellet mag. I feed the mag with a speedloader, I hate that the pellets don't fall in. Do they fit better in a pellet mag?

View attachment 446907

Ok, so here's my take on it:
The regular mags shoot pellets just fine. They can also shoot a few select slugs well, but don't shoot the majority of available slugs due to the slug diameter being too small. Hence the need for the slug mag.
Meaning, the slug mag obviously has a smaller diameter bore, so I don't think you should expect pellets to fit well in the slug mag.