EDgun Edgun Leshiy 2
- Thread starter Navnesen
- Start date
Is Brian at Edgun West done with the first 100? I’m in the mid 250’s just wondering how far along Ed and Brian are with deliveries and pre orders. Anyone know?
Upvote 0
A few days late posting a picture, but my Barra scope just arrived today so I thought I'd mount it up to test it out.
omark04 - that muzzle break kit looks sweet. I have a Tishina setup on order, but I hope the muzzle break become available separately as it would be fun to mount when going to the range.
omark04 - that muzzle break kit looks sweet. I have a Tishina setup on order, but I hope the muzzle break become available separately as it would be fun to mount when going to the range.
Upvote 0
This is the set up I done on my L2, I just waiting for the magazine in 25. For install with the muzzle brake 
Upvote 0
Well guys I took one for the team!!! Hahaha I just got my Leshiy 2. And never even had time to shot it but!!! I sent Photos measurements then I took the grip off my leshiy 2 and sent it to Steven Brown so he can use it as a prototype to make future custom laminate grips that everyone knows so well the best made by Mr. brown so very soon he will make what you need.
Upvote 0
Kudos on you for doing that. I still don't own one of his pistol grips yet for my Leshiy Classic. Curious to see what he comes out with. Thanks.
Upvote 0
This will be one of them for the leshiy 2. This is for my impact but it will fit the leshiy you have to use washers to make it fit but he's going to make some Adjustment so you don't have to but this is roughly what it's going to look like
Upvote 0
Some good info from Brian for those planning to change out the factory pistol grip to an aftermarket AR15 grip.
https://youtu.be/n2zaycI7Hjw
https://youtu.be/n2zaycI7Hjw
Upvote 0
Does anybody know what bipod this is on the Leshiy 2 video? I installed an Atlas bipod it doesn’t give enough clearance to fold the air tube and lock it.
Upvote 0
Great question as I would like to know which brand of bipod fits the best as well. I was just about to order one.
Upvote 0
Jack, I’m an atlas guy too - this is a bummer, can you show some photos of the bipod and how it fits (or rather doesn’t fit)? Maybe it just requires a 1/2” Picatinny riser to work.
Upvote 0
On Brian’s (EDgun west) Instagram feed, it shows him rockin an atlas on the pre production model...
seems to fit great...
seems to fit great...
Upvote 0
The bipod issue occurs when legs are extended and you try to fold the L2. It makes it a little awkward when changing mags, but not as much an issue as the Leshiy Classic which has to be folded completely to cock and engage the safety. A small riser section may be enough to clear it.
Upvote 0
Here are couple of pictures of where the Atlas bipod leg will come in contact with the air tube. As it is the bipod leg is almost parallel to the lower air tube. A very tall riser would be needed to clear that air tube.
this is the clearance needed to fully fold the air tube and lock it.
this is the clearance needed to fully fold the air tube and lock it.
Upvote 0
Just a heads up for anyone putting Picatinny rail's on the side of your hand guards there isn't enough clearance when you install the moderator kit it scratches the tube inside the handguard
Upvote 0
Thank you for this. I would most certainly have boggered mine up. That's a shame as it was 70% of the reason I got the kit. I wanted a 2ndary red dot mounted...
Upvote 0