EDgun Edgun Leshiy 2
- Thread starter Navnesen
- Start date
I have 3 different testersI already have one for the L2
I agree. Data talks
sorry if a stupid question, whats a reg tester for ? saw it in the parts section whi;e looking for extra mags
Upvote 0
I have 3 different testersI already have one for the L2
I agree. Data talks
sorry if a stupid question, whats a reg tester for ? saw it in the parts section whi;e looking for extra mags
It is a device that allows you to precisely set the output of your regulator. It also allows you to test the refresh of the regulator as well as leakage and creep.
Upvote 0
It was a good day. More of the same shooting enjoyment. Thanks to Brian for taking the time to inspect, adjust and test the gun. It is exceeding my expectations. Installed the grip I ordered months ago for this rifle. It is coming together.
It is worth the wait. For those on the list... Just be patient. It is worth the wait and you really do want to let Brian check out what he is going to ship you.
It is worth the wait. For those on the list... Just be patient. It is worth the wait and you really do want to let Brian check out what he is going to ship you.
Upvote 0
First of all thank you for sharing your invention..i have a question, the ¨exit hole¨ is valid for all the calibers? thanks.
Upvote 0
This was worth 3-4db in the stock shroud. Not earth shattering, but much more pleasant.
I was unimpressed with the accuracy of my .22 350mm LW barrel until I put this air stripper on the barrel. Now it's a laser. .22 hole groups at the 17 yds I can currently shoot at in my basement. Really strange.
Did you replace the factory baffle with this 3D printed air stripper and baffle?
Upvote 0
Yes, the baffle didn't help accuracy and the stripper didn't reduce sound. The stripper might be worth a db or two if you added something to the rear to slow the escape of the air.
Upvote 0
Be very careful when you mount the moderator, should go straight in without the long bolts touching the stripper or the body might separate from the threaded part, mine just did - layer adhesion failed
Edit: BTW, the treads was spot on - kudos to aimbig!
Upvote 0
So who here is willing to admit shooting Crosman Premier Hollow Points with their Leishy 2? Semi auto can burn through pellets fast and I'm curious how they do.
Upvote 0
Update, .25 350mm reg 153 shooting JSB 34 mk2. using my Cadwell chronograph(not the Labradar are used last time outdoors with a temperature of below freezing) Gun had been sitting for 36 hours charge with air in a 72°temperature house, no shots fired.
Set the chronograph up in my garage with a temperature of 40°
first shot was extremely high last two shots on the second magazine fell off the regulator. Refilled and shot the third magazine.
Set the chronograph up in my garage with a temperature of 40°
first shot was extremely high last two shots on the second magazine fell off the regulator. Refilled and shot the third magazine.
Upvote 0
I've put at least 20 different pellets through my .22 350mm LW and the only thing that groups really well is the JSB 18.1. The CPUM is a little better than the CPHP and both shoot better than JSB 15.89 or Hades.
Upvote 0
Be very careful when you mount the moderator, should go straight in without the long bolts touching the stripper or the body might separate from the threaded part, mine just did - layer adhesion failed
Edit: BTW, the treads was spot on - kudos to aimbig!
What material are you printing with? I was thinking of using PETG.
Upvote 0
Received my L2, pre-order 270 from 6/24/20 order date yesterday. .22 350mm barrel. Mounted my scope and used my laser boresight to quickly get it up and running. Walked out of my warehouse bay, which butts up next to a canal and state owned grassy area, and saw a huge alpha iguana just begging to be blasted. So took him out with one shot to the head with the very first shot from the gun! Range about 30 yards. Needless to say I was very impressed!
Upvote 0