EDgun Edgun Leshiy 2
- Thread starter Navnesen
- Start date
Shot some 50m groups today at 272ms 16grn jsb
In some windy conditions wich can be seen in the results resulting in some horizontal spread.
But overal grouping is as expected concidering my trigger control is still not optimal ( its a learning curve
comming from match triggers)
In some windy conditions wich can be seen in the results resulting in some horizontal spread.
But overal grouping is as expected concidering my trigger control is still not optimal ( its a learning curve
Upvote 0
.22 272ms 44 shots from 300 bar
Shot at 100m the wind does its thing with my group
I can't wait when the covid lockdown and curfew is gone and my indoor gunrange will open again here in the netherlands
Upvote 0
Finally received my L2 last Thursday.
.22 350mm. Mine loves the JSB 13.4gr. very accurate, and as quiet as most of my PCP's. I'm getting 6 mags (48 shots) at 840fps.
I'm not a hunter, so I wanted as much shot count as possible, so I was planning to tune for light pellets. I turned the reg down to 115 bar (estimated. Turned in the adjustment 15 minutes from original stated 130bar). I purchased the nozzle kit and am running one .5 and one .7.
I am getting along fine with the trigger, even though I'm a bit of a 2 stage trigger snob in general.
Going through pellets and air like crazy. I'm glad I have a compressor and two 97-CF tanks.
Had a little issue with mag indexing at first, but seems to be resolved now.
Have fun, Scott
.22 350mm. Mine loves the JSB 13.4gr. very accurate, and as quiet as most of my PCP's. I'm getting 6 mags (48 shots) at 840fps.
I'm not a hunter, so I wanted as much shot count as possible, so I was planning to tune for light pellets. I turned the reg down to 115 bar (estimated. Turned in the adjustment 15 minutes from original stated 130bar). I purchased the nozzle kit and am running one .5 and one .7.
I am getting along fine with the trigger, even though I'm a bit of a 2 stage trigger snob in general.
Going through pellets and air like crazy. I'm glad I have a compressor and two 97-CF tanks.
Had a little issue with mag indexing at first, but seems to be resolved now.
Have fun, Scott
Upvote 0
My pre-order number is 1254, I noticed most of you guys are just posting 3 digit numbers. Are you just using the last 3 digits?
Upvote 0
Just forget about it, should make the wait easier. Some of these guys are just getting theirs now after waiting since July etc. I consider myself lucky to have gotten mine so quickly ordering on the 15th of November.
ETA: as I was writing this, my L2 showed up at my doorstep.
Upvote 0
Just forget about it, should make the wait easier. Some of these guys are just getting theirs now after waiting since July etc. I consider myself lucky to have gotten mine so quickly ordering on the 15th of November.
ETA: as I was writing this, my L2 showed up at my doorstep.
Lucky duck...I've got plenty of guns to play with till it gets here. I'm getting .30 250mm, I'm sure I'll be trying to reduce the audio signature
Upvote 0
I bought mine second hand... just had to ask. Mine was from someone that bought it and it was too loud for his neighborhood... maybe 50 pellets through it.. was just like new when I got it... now I have to find time to go shoot it, oh and need to get some air. New compressor showing up Saturday.
Upvote 0
When I got my first Huben all I had was a Shoebox compressor...that just wouldn't cut it. After 5 different compressors I've settled on an Omega Turbo charger.
Upvote 0
I have a friend with an Alkin dive compressor, and he will fill my tank to 4800 psi for 5 bucks a shot, so I will use that for most of my air, but I bought the GX CS3 from amazon for 500 bucks and plopped the 4 year warranty on it as I know it will fail at some point, and I am not a rebuilder of things that can kill me. I have a suspicion that Assurion (the warranty company) has zero idea how fragile these things are and will shortly remove the ability to warranty them, but basically they pay for shipping and all that, and typically they send a new one to replace it or a refund.
Upvote 0
Well Assurion is like a bunch of aftermarket warranty company's ...If you need to use it, they'll just refund the cost of the warranty. Hope that doesn't happen to you and the compressor work's for years and years with no problems
Upvote 0
I have used assurion a lot in the past, in fact they typically are the ones that do phone insurance when you get the protection. Never ever had an issue with them. In fact I have never talked to anyone there ever, it was just a new phone and sent it back to me. Once I used it for a TV from Amazon... they sent a new TV.
Hope its never needed either, but it is a better feeling than buying it with its 1 year warranty.
Hope its never needed either, but it is a better feeling than buying it with its 1 year warranty.
Upvote 0
Well Assurion is like a bunch of aftermarket warranty company's ...If you need to use it, they'll just refund the cost of the warranty. Hope that doesn't happen to you and the compressor work's for years and years with no problems
Upvote 0
Sorry about the double post? Don't know what caused that...I went to Amazon and checked out the compressor. That look's like a very nice unit. Hope all goes well for you.
Upvote 0
Saw Brian’s post about delayed shipping because of weather. Does anyone else have packages from Brian sitting at FedEX facility and going nowhere for days?
Upvote 0
I just got mine today, but we are in the same state. I have other things coming from Ohio and they have been stopped due to weather, so if you are in weather areas you will probably be affected. Even if the truck has to go through the weather to get to you.
Upvote 0
Yeah depends on where you’re at the weather is really affecting FedEx deliveries, I have a custom adapter coming from DonnyFL. The adapter was supposed to arrive today, but when I checked it’s location this evening it was in Memphis three states away from me.
Upvote 0