Edgun Leshiy Buttpad Solution!

Jump to latest Follow Reply
mtnGhost

mtnGhost

Member
Dec 15, 2018
3,672
582
Defected from the PNW, United States
Let me start by saying that I love the Leshiy, but I hate some things about it - including the buttstock. I have always had a hard time getting it shouldered properly, making it difficult for me to hunt with.

So the other day, I wanted to see if I could shoot 20.2gr slugs with it, and I was reminded of the buttstock problems after cranking up my regulator. My original plan was to modify a Magpul MOE stock to fit the air tube, but then I remembered that I had the milspec UTG PRS stock that came with the Raptor Mini. I got a little creative with an idea to make it fit, and low and behold - it works. Very well!

1589930934_3484895095ec46bb6a30f23.25108193.jpeg
1589930935_6685139635ec46bb71e6888.03602600.jpeg
1589930935_15782035625ec46bb7da9d13.14579564.jpeg
1589930936_5030529255ec46bb84d3002.07900215.jpeg
1589930937_6752613595ec46bb9114c82.81558198.jpeg

I haven't re-attached the cheek riser, since all of my optics sit nice and low on the Leshiy, but it could be reinstalled easily. If you're looking for a virtually plug and play solution, this is definitely an option! 😎
 
Let me start by saying that I love the Leshiy, but I hate some things about it - including the buttstock. I have always had a hard time getting it shouldered properly, making it difficult for me to hunt with.

So the other day, I wanted to see if I could shoot 20.2gr slugs with it, and I was reminded of the buttstock problems after cranking up my regulator. My original plan was to modify a Magpul MOE stock to fit the air tube, but then I remembered that I had the milspec UTG PRS stock that came with the Raptor Mini. I got a little creative with an idea to make it fit, and low and behold - it works. Very well!

I haven't re-attached the cheek riser, since all of my optics sit nice and low on the Leshiy, but it could be reinstalled easily. If you're looking for a virtually plug and play solution, this is definitely an option! 😎
Click to expand...

Approximately how much more drop does this provide at the butt stock? And how did it go with the slugs?

I've thought about doing something like this since this is also an issue I have with my Leshiy. And since my Dedal sits a bit high for me it probably would be easier to get on target quickly if I raised my cheek weld slightly. Seems like with the right stock I could accomplish both the higher cheek weld and the better shoulder position. 

In PiterM's Leshiy thread somebody posted a picture of a Leshiy with what I assume is an MFT Minimalist Stock. 

1589983851_4051761745ec53a6bb5e650.25257572.jpg

 
Upvote 0
Let me start by saying that I love the Leshiy, but I hate some things about it - including the buttstock. I have always had a hard time getting it shouldered properly, making it difficult for me to hunt with.

So the other day, I wanted to see if I could shoot 20.2gr slugs with it, and I was reminded of the buttstock problems after cranking up my regulator. My original plan was to modify a Magpul MOE stock to fit the air tube, but then I remembered that I had the milspec UTG PRS stock that came with the Raptor Mini. I got a little creative with an idea to make it fit, and low and behold - it works. Very well!

I haven't re-attached the cheek riser, since all of my optics sit nice and low on the Leshiy, but it could be reinstalled easily. If you're looking for a virtually plug and play solution, this is definitely an option!
1f60e.svg
Click to expand...

Approximately how much more drop does this provide at the butt stock? And how did it go with the slugs?

I've thought about doing something like this since this is also an issue I have with my Leshiy. And since my Dedal sits a bit high for me it probably would be easier to get on target quickly if I raised my cheek weld slightly. Seems like with the right stock I could accomplish both the higher cheek weld and the better shoulder position. 

In PiterM's Leshiy thread somebody posted a picture of a Leshiy with what I assume is an MFT Minimalist Stock. 

Click to expand...

You can lower or raise the pad easily..

1590186130_2823310105ec85092bd49e9.26411500.jpeg

 
Upvote 0
I really like the idea of the second tank that’s out there. I just can’t stand the way it makes the butt stock look. Seems like an easy fix if you’re good at designing and printing poop. Essentially use the current design the Leshiy has but with a second tank insert and make it so the pad covers both tanks. While you’re at it make the buttstock a little longer. Or adjustable. I drew our what I mean on a pic of the current setup. Just used my phone’s markup feature it you’ll get the point. Honestly if someone made these and sold the tanks they’d make a killing! I’d gladly pay for someone to design and make a couple. One for each of us lol! Shoot I’ll buy you the second tank kit too! Anyone have China’s phone #? 
4219C109-3838-4CF2-A0B4-00A011E36E14.1605033996.jpeg
01DF1075-E156-4A35-AD9E-720AE5D9AEF0.1605033996.jpeg

maybe even a second piece for the left side of the bottom tank to make that flow better. Don’t know why but the buttstock really bothers me like this. Seems like an easy enough fix and an opportunity to lengthen the butt pad. Shoot or kit redesign the whole damn thing to look like the Leshiy 2 hahahahaha! Idk if it was a $400 or even $500 upgrade and looked good. Imagine a lot of people would buy it. If not at least my setup would be dope AF lol
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu