This is a very accurate and highly reliable Original EDGun Leshiy classic with a one of a kind ARCA Swiss handguard with a removable M-LOK attached Picatinny rail and Magpul AFG-2 fore grip (FDE or black). I fabricated this handguard from an FX Panthera factory rail + accessory bridge, and it both looks and fits the rifle like it was made for it. Built the rail to improve the rifle for off-hand shooting and to mount my thermal and NV accessories.
There's two hidden set screws on the back of the bridge that bottom out on a thin Delrin sheet between the bridge and shroud that bottom out to clamp the rail from the top, and there's a hidden Pic rail slot that I nilled down to match the Leshiy's built-in rail. The Magpul grip receives the rail on the bottom perfectly snug making it all fit beautifully. It's very easy to remove and reinstall, and it won't budge at all when clamped. It makes the rifle easier to shoot off-hand and it's very comfortable and ergonomic to hold and reload it using the AFF2 grip.
Barrels
I have (3) very accurate Lothar-Walther barrels for it (all from EDGun that LW made to his custom specs):
Accessories
- STO baffle - very effective for .22 & .25
- DonnyFL baffle - works well with .25 and .30
- (2) standard size extensions (one is for the DonnyFL)
- 50mm extension (came with a 3D printed baffle that I got from Russia that failed)
- Spare valve (I have a trick for maximizing the life of the valves)
- Huma regulator - this is a very short profile single outer o-ring Huma regulator that can be tuned from 85-180bar and a generous size plenum. Since the regulator is very small, it adds some extra volume in the air cylinder (more efficient than the standard 2 o-ring Huma regs). The reg can go higher, but I generally keep it between 125-170bar depending on caliber, ammo, and the tune.
Terms
Offering this in the .25/350 configuration standard with the factory moderator baffle, internal spacer, plus:
- STO.baffle
- Spare valve
- Huma reg and factory reg
- ARCA handguard
- Magpul AFG-2 grip (FDE or black)
Price: $1295 + 1/2 shipping CONUS (shouldn't be more than ~$12-15 each for shipping).
I can offer additional barrels to the buyer of the rifle at a discounted price of 100/ea. Otherwise, 195 + 1/2 shipping CONUS for each barrel.
DonnyFL v2 baffle + shroud extension: $50 for the buyer of the Leshiy or $70 shipped otherwise.
Red dot is not included. I have a reg tester and can tune it however you want.
Excellent ultralight backpack gun or truck gun:
There's two hidden set screws on the back of the bridge that bottom out on a thin Delrin sheet between the bridge and shroud that bottom out to clamp the rail from the top, and there's a hidden Pic rail slot that I nilled down to match the Leshiy's built-in rail. The Magpul grip receives the rail on the bottom perfectly snug making it all fit beautifully. It's very easy to remove and reinstall, and it won't budge at all when clamped. It makes the rifle easier to shoot off-hand and it's very comfortable and ergonomic to hold and reload it using the AFF2 grip.
Barrels
I have (3) very accurate Lothar-Walther barrels for it (all from EDGun that LW made to his custom specs):
- 250mm .25cal
- 350mm .25cal
- 350mm "Dirty .30"
Accessories
- STO baffle - very effective for .22 & .25
- DonnyFL baffle - works well with .25 and .30
- (2) standard size extensions (one is for the DonnyFL)
- 50mm extension (came with a 3D printed baffle that I got from Russia that failed)
- Spare valve (I have a trick for maximizing the life of the valves)
- Huma regulator - this is a very short profile single outer o-ring Huma regulator that can be tuned from 85-180bar and a generous size plenum. Since the regulator is very small, it adds some extra volume in the air cylinder (more efficient than the standard 2 o-ring Huma regs). The reg can go higher, but I generally keep it between 125-170bar depending on caliber, ammo, and the tune.
Terms
Offering this in the .25/350 configuration standard with the factory moderator baffle, internal spacer, plus:
- STO.baffle
- Spare valve
- Huma reg and factory reg
- ARCA handguard
- Magpul AFG-2 grip (FDE or black)
Price: $1295 + 1/2 shipping CONUS (shouldn't be more than ~$12-15 each for shipping).
I can offer additional barrels to the buyer of the rifle at a discounted price of 100/ea. Otherwise, 195 + 1/2 shipping CONUS for each barrel.
DonnyFL v2 baffle + shroud extension: $50 for the buyer of the Leshiy or $70 shipped otherwise.
Red dot is not included. I have a reg tester and can tune it however you want.
Excellent ultralight backpack gun or truck gun:
Last edited:
