Edgun Leshiy video of all options, upgrades and overview !

[Shooting Targets]

Folks, put out a quick overview of the last 8 months modifying the edgun leshiy. A video showing the modifications possible and how easy these are. 

This is probably the easiest gun to work on. .177 ,22, .25 shot counts discussed along with accuracy vs fx impact ect. 

Thanks, 

Jay

 

[Brian10956]

Nice video on one of my favorites 

 

[Guest]

.....

 

[Shooting Targets]

You will like it. I found the best part is in hiking the hills. Why it is 4 lbs. vs 15. I am normally out of breath hitting the hills, this helps some believe it or not. 

 

[Hynzie]

JAY DOG awesome video ,,heck of a job..never ever liked the edguns ,,now there growing on me big time,,,recently talked to BRIAN cool guy,,hope to add a couple to the stable THANKS PAT ,,,ps hows the AGN going give me a pm if you can and dont 

 

[nick463]

Great video, what an awesome rifle.

 

[kaylaindy]

Where do I get a Bright Blue Lieshy?

 

[Brian10956]

"kaylaindy"Where do I get a Bright Blue Lieshy?

call Brian at EdgunWest if its available he will get it.

 

[Guest]

.....

 

[Brian10956]

I have a question, does it matter when changing barrels which end is the breach or muzzle as both end look the same .

 

[Guest]

.....

 

[Macros]

Yep they have a choke. The breech end is the one with the rifling a fraction more recessed than the crown. If you try put a pellet into the crowned end it'll be very difficult.

I posted about the accuracy on Piter's thread yesterday - I find that the biggest factor, on mine at least, is the recoil of the big, heavy hammer and spring. Set the reg too high and you hst is going to be high enough that the gun really kicks.
I've basically made peace with having my leshiy relatively low power (680fps with 18gr jsb, 250mm barrel) with the reg on 85bar and hst about 3 clicks up from absolute minimum. 
Now the thing shoots properly accurately and feels like a pcp rather than a super light, short springer. If I need more power, then there are always the bigger guns!

 

[intenseaty22]

Great video Jay, thanks for sharing. Do you have any group sizes for .177 cal out to 30-40 yards you could share? 
I’m highly considering one of these in .177 primarily, but I think I would spring for the .22 barrel as well. Don’t care to have it in .25. 

 

[Shooting Targets]

Intensety22 Not sure, If I have some of those groupings I will look. If I do I might send them private. Mike hit me up yesterday on posting under a company name. I understand since I am not a paid sponsor I should not post videos ect. It is a perception thing, remind you I do not sell the edgun....

 

[intenseaty22]

"jaydog"Intensety22 Not sure, If I have some of those groupings I will look. If I do I might send them private. Mike hit me up yesterday on posting under a company name. I understand since I am not a paid sponsor I should not post videos ect. It is a perception thing, remind you I do not sell the edgun....

No worries. I was just wanting a number as a reply. No pictures or videos needed. Just wanting to know what to realistically expect at say 35 yards 1/4 inch, 1/2 inch, etc. Thanks. 

 

[Shooting Targets]

ahh say easy 1/2 inch 35 yards and probably could do 50 if you do your part. The gun is only half or 1/3 the weight of other guns and that is to me the reason it is hard to hold steady.