EDgun Edgun r3 tuning

[Cole44007]

Anywhere know who to send an Edgun matador r3 to for a tune

 

[Cole44007]

Or how to adjust the hammer spring on this rifle

 

[ohiochuck]

Contact Ernest Rowe to see if he will do it

[email protected]​

 

[MikeVV]

Or how to adjust the hammer spring on this rifle

Pretty simple actually, just "tune into"...You Tube !

Here's just two of many. I believe Brian and others have a bunch or videos on the care and feeding of the R5, R5M, Lelya, (the last two are mostly the same gun).

Mike

 

[Cole44007]

Contact Ernest Rowe to see if he will do it

[email protected]​

He has unfortunately retired

 

[Gerry52]

Send a PM to Centercut (Mike). The R3 that he loaned me is beautifully tuned. Maybe he'll help you with yours.

 

[Cole44007]

Send a PM to Centercut (Mike). The R3 that he loaned me is beautifully tuned. Maybe he'll help you with yours.

I sent him a message he never responded

 

[Cole44007]

I would like to speak with him tho

 

[Centercut]

Send a PM to Centercut (Mike). The R3 that he loaned me is beautifully tuned. Maybe he'll help you with yours.

The Eddy I have is a .22 R3 Long. It shoots either NSA 20.2 grain .2165, Daystate 20.3 Howlers or 22 grain FX Hybrids very well. The 20.2 grain at about 990 fps, the Hybrids about 960 fps. All three accurate out to about 175 yards.
The only mods I did were a Huma Reg and Power Plenum, and the Hammer weight kit. All from @Huma. The trigger was done by Derrick @zx10wall who owned the gun prior to me, and is excellent.

 

[Cole44007]

The Eddy I have is a .22 R3 Long. It shoots either NSA 20.2 grain .2165, Daystate 20.3 Howlers or 22 grain FX Hybrids very well. The 20.2 grain at about 990 fps, the Hybrids about 960 fps. All three accurate out to about 175 yards.
The only mods I did were a Huma Reg and Power Plenum, and the Hammer weight kit. All from @Huma. The trigger was done by Derrick @zx10wall who owned the gun prior to me, and is excellent.

View attachment 556760

How much would you charge to install the huma regulator

 

[TnCnDn]

Does Derrick not have a business?

 

[Gerry52]

How much would you charge to install the huma regulator

Have you no interest in learning how to do it yourself? It's usually a fairly easy & straight forward process & you'll probably learn other things while doing it that will benefit you later on.

 

[Centercut]

How much would you charge to install the huma regulator

Derrick @zx10wall has a business near Houston, TX called Tenacious Airguns. Contact him about the Eddy and tuning it with the Huma reg, PP and Hammer weight.

 

[Cole44007]

Derrick @zx10wall has a business near Houston, TX called Tenacious Airguns. Contact him about the Eddy and tuning it with the Huma reg, PP and Hammer weight.

Do you know how to adjust the stock hammer spring on the r3

 

[Centercut]

Yes. Pull off stock. Look at hammer adjust screw. Turn in or out to adjust hammer tension. Most have lock nut very easy.

 

[Cole44007]

Yes. Pull off stock. Look at hammer adjust screw. Turn in or out to adjust hammer tension. Most have lock nut very easy.

Is it just the silver thing?

 

[Hobbyman2007]

Congrats on the new rifle. Looks like you dove right in. ATA boy. No better way to learn about you rifle than to take it apart. If you haven’t see it.

 

[Centercut]

Is it just the silver thing?

View attachment 556806

Yes. Looks brass in the photo.

 

[Gerry52]

Go to YouTube & search Edgun R3. There are MANY instructional videos that give step-by-step directions how to do things! Can't get much easier than that.

 

[Cole44007]

Go to YouTube & search Edgun R3. There are MANY instructional videos that give step-by-step directions how to do things! Can't get much easier than that.

Anyone know why when I feel it to bar it’s shooting at 670fps the previous owner said it was tuned for 18g JSB pellets at 840 and a 200 bar fill but I get these fps levels