EdGun R5M extended shroud

[woogie_man]

Is there anyone out there making an extended shroud unit for the R5M?

I bought one of the Eagle Vision mounts that will allow you to thread on a normal silencer on the end. Though with the offset nature of the R5M it honestly looks stupid when mocked up. So that got me to thinking about extending the shroud and just going longer.

Another option I have thought about is someone that is able to do the 3D printing thing and just have another core printed to use with the adapter, and then swap out when I don't want to use the longer unit.



Any thoughts or help guys?

 

[Kaeokini]

Aloha Woogie,

try and contact Jack K. he makes a 3D printed adapter/extension that works with the BAT moderator. I bought one from him for my Leyla 2.0 which should be the same shroud.

Aloha, Keone

 

[Peskådot671]

Put a WTB ad in The Classifieds for an EDgun BAT moderator. It will add 2.6" of length when switching out the factory moderator. 

 

[woogie_man]

That would be ideal!

I did talk to EdGun West and the BAT mods are no longer being made or imported anymore, sadly.



Does Jack have the outer tube as well? I am assuming he is here on the forums? I will do some looking and see if I can't find him.