Resources Element Helix parallax wheel......DIY??

[Bramezy]

I'm very happy that you like the wheel.

I've just finished the new version v8 and made it available for free again at Cults 3D.
This time, the wheel is slightly larger at 150 mm and also wider at 15 mm for more marking space. The wheel now consists of two parts. A connector with three neodymium magnets and the wheel, also with three neodymium magnets. The magnets measure 10 mm x 2 mm. Both fit together in only one position and can therefore be easily removed and reassembled for transport.
Since a friend has the same profile as the turrets on his Element Helix Parallax tower, I designed two versions of the connector. One (A) for the "old" star shape and one (B) for the "new" shape, which can also be found on the turrets.

Have fun printing.

View attachment 555694
View attachment 555695
View attachment 555696
View attachment 555697
View attachment 555698
View attachment 555699

This is great! Need this for many other scopes lol.

 

[Marco K1]

I need to come up with a pointer on mine, as well as an elevation turret knob. Not sure if shootinf wftf or hunter yet.....

I simply took the wide metal from a folder (unfortunately, I don't know the English word), cut it to size with scissors and a hole punch, and bent it. Then I attached it with the scope mount screws. See the last picture. It works great, but it's not a magic bullet.