• Please consider adding your "Event" to the Calendar located on our Home page!

Entry PCP for FT

What division are you looking at? What rule set? Aafta or world? The suggestions below are for aafta hunter division but could apply to world.

I was asking many of the same questions last month at our aafta field target match. I listened to their advice which was sound. I then said screw it and and spent more so I wouldnt have to or want to upgrade as I was totally hooked after participating in a match. Getting good glass on a less expensive rifle is always better than cheap glass on a good rifle as you can always move the scope to another rifle.

Also I find left side loaders ANNOYING. I used a friends AA S510XS with a magazine. While a nice rifle, the limitations of it was annoying. You have to take off the wheel or fumble with the magazine to get it through it. Especially when changing lanes. I dropped the mag a couple times. Try to get something that you can get a single shot loader for, vs a single shot tray. You'll find it far better. Its not a must have but something to consider. Also many fields will require magazines removed when changing lanes for safety. Thats why the left loading is cumbersome.

The avenge x has shown that its a solid entry level pcp. We had someone shoot one at our match in september and scored a 42/60 with it. Another top shooter at our field got one and has liked it. Its consistent, regulated and a solid rifle. Especially at its price point.

For a bit more, a Daystate revere is a SOLID rifle for ft. Its what many consider a rifle to keep in the family and pass down. Its not as flashy as a wolverine but its solid. I heard of a match with 14 shooters and 12 were revere's.

Do you have a scope for it? If not an Athlon Argos G2 (make sure to get gen 2 athlon scopes as there is a difference) or a hawke sidewinder are good scopes that wont break the bank. I've been told good things about riton scopes also and this was confirmed yesterday talking with a top notch shooter. I've not seen or used one yet. Make sure the focus goes to 10 yards/meters as many wont.

The main thing is to get something that will be reliable and ideally have a shot count to get through a match . Usually a regulated rifle will be more consistent than non regulated. Get your rifle, shoot it and practice and learn your setup. Create a good dope sheet. You will see people who know their setup outperforming those that don't. Its all about having fun. You dont need high end rifles to have fun.
 
I'm assuming you are getting into Hunter Field Target and that you need to put together a whole kit. A Marauder Field and Target is a good place to start. It's regulated, easy to fix with excellent company support. They don't cost too much which will help you get some good glass.

The Airgun Revisions Challenger HFT also meets that same criteria.

If you can swing it a Daystate Revere is a solid choice, but now we are breaking the 1k+ mark.

Of course, there are some very nice used airguns here in the classifieds that can get you going as well.
 
In the open division, you'll be sitting on a bum bag and shooting off your knee. For that reason, a rifle with a rail underneath to accomodate a hamster (where did that name come from?!!) might be the best way to go. Given that, I would suggest the RAW TM1000 (of course, that's what I shoot!). Also, the magnification on your scope will be unlimited. You'll want a scope that has clear glass and fairly high magnification for range finding. The Sightron Siii is the best bang for the buck FT scope.

Some thoughts. Welcome to FT and Open Class. I shot that class for a number of years and it's lots of fun.

Chas