@csdilligaf my regulator took a bit of time to settle since it didn't fully seal the regulator so when it was in my vault for a day the pressure increased. Nowadays it stays put where I left it so that is gone and can't really say that I have issues with the first shots being slow now.
I've been testing a bit with pellets in .22 on request and the results were good!
Tested 3 different pellets here: JTS Dead Center Precision 18.1 grains, H&N barracude 18 grains and JSB Exact Heavy 18 grains, all at around the same velocity of 270 to 275 m/s (885 to 900 fps). Will redo the test soon with the shorter barrel since the 550mm version is a bit overpowered with the valve at maximum opening. Also getting a delivery soon of some custom sized slugs to test. Measured the grooves on the barrel at .2195 for the CZ barrel and .2212 for the LW barrel so the standard slugs that are available are a bit undersized with .217 and .218 (for as far as you can trust the size on the packaging ). Zan has some availability in .219 but I still have to test them at the range.
I've been testing a bit with pellets in .22 on request and the results were good!
Tested 3 different pellets here: JTS Dead Center Precision 18.1 grains, H&N barracude 18 grains and JSB Exact Heavy 18 grains, all at around the same velocity of 270 to 275 m/s (885 to 900 fps). Will redo the test soon with the shorter barrel since the 550mm version is a bit overpowered with the valve at maximum opening. Also getting a delivery soon of some custom sized slugs to test. Measured the grooves on the barrel at .2195 for the CZ barrel and .2212 for the LW barrel so the standard slugs that are available are a bit undersized with .217 and .218 (for as far as you can trust the size on the packaging ). Zan has some availability in .219 but I still have to test them at the range.
Upvote 0