I seem to remember seeing a post where someone had made a list of the O ring sizes and some equivalents, but I am dammed if I can find it after several searches? Can anyone point me in the right direction please...
Skout Epoch O ring sizes?
- Thread starter Tricky-Dicky
- Start date
As far is I know, all of the O-Rings are in the service manuals. Easy enough to look up.
I made a complete list of all listed in the manual and ordered them straight away.
mike
I made a complete list of all listed in the manual and ordered them straight away.
mike
Upvote 0
They don't list the O rings in the Epoch manual, and it's limited to the regs in the Evo manual, I thought I had seen a full list of non poly alternatives?
Upvote 0
Go to the Skout website-Click on "Support" -then Click on "Diagrams"
all the parts are listed
they have the numbers 7011 or 9008 ..the first number is the hardness of the ring ..the last part is the size. 9008 is a 8mm with a 90 durometer
Upvote 0
Yes, the number has the Duro first, the last number/s are for the numbered O-Ring system, not metric (SAE).
So, the example provided by manabeknives is 90 Duro, #08 O-Ring. #7010, would then be a 70 Duro, #10 O-Ring....etc.
And yes, as manabeknives explained, they ARE listed in the Service Manuals.
mike
So, the example provided by manabeknives is 90 Duro, #08 O-Ring. #7010, would then be a 70 Duro, #10 O-Ring....etc.
And yes, as manabeknives explained, they ARE listed in the Service Manuals.
mike
Upvote 0
"Great! They don't list the O rings for the .177 pellet probe!"
Hmmm....best to call them and get that size (x2). That bites!
mike
Hmmm....best to call them and get that size (x2). That bites!
mike
Upvote 0