Getting this ErgoAir Fox Bat grip to fit the Rapid Air Worx HM1000x was a bit of a challenge, but it’s on there now! Scandinavian Arms bipod for support 
ErgoAir Fox Bat on RAW HM1000x chassis
- Thread starter Michael
- Start date
interesting grip
Nice Macgyvering on the fit
What is the white stuff on 1st pic?
do they come without the beavertail?
Mike
Nice Macgyvering on the fit
What is the white stuff on 1st pic?
do they come without the beavertail?
Mike
Upvote 0
Hi Mike,
The white stuff is chalk! So I could identify the raised points that needed to be sanded.
Upvote 0
LOL...i thought you got aggravated with the dremel toolHi Mike,
The white stuff is chalk! So I could identify the raised points that needed to be sanded.
Upvote 0
what is that camo looking stuff on your scope? I absolutely need it whatever it is for my Airforce build.
Upvote 0
A simple and inexpensive vinyl wrap https://www.amazon.com/gp/product/B084YBBMXW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Upvote 0
Your new avatar......Mr Gutsy himself! That takes some gonads to take a dremmel to the chassis. Lol
Upvote 0
That's chalk that helps mark the Grip as it's worked on.
At no point did he say he ground in that area.
If he did? He's an Idiot.
Read post #4.
At no point did he say he ground in that area.
If he did? He's an Idiot.
Read post #4.
Last edited:
Upvote 0
I've got one of those. I bought it six months or more back.
Well VERY similar anyway. The surface is smoother, but the shape is very much the same. While in general, I like the shape, it's a bit small for my hand, otherwise it's pretty comfortable. I've thought of adding some epoxy to make it larger, I just haven't done it.
And yeah, I had to do some "fitting" also. Seems that most firearm grips need some massaging to fit the airguns.
No pictures.
Mike
Well VERY similar anyway. The surface is smoother, but the shape is very much the same. While in general, I like the shape, it's a bit small for my hand, otherwise it's pretty comfortable. I've thought of adding some epoxy to make it larger, I just haven't done it.
And yeah, I had to do some "fitting" also. Seems that most firearm grips need some massaging to fit the airguns.
No pictures.
Mike
Upvote 0
You have the Royal Arms Grip? That's the one I use. I've done a bunch of those to fit Air Guns.
Fox Bat - $59.99
Royal Arms - $39.95
Upvote 0
Nice job! I replaced the grip on my HM1000X - first with a MagPul then this ERGO Vertical Grip. Much better than the stock grip on the HM1000X. Also pretty easily installed - no chalk necessary!
Also notice the CARM SSL - just got it and really like it. 
Also notice the CARM SSL - just got it and really like it. Upvote 0
Well, it's back to the MagPul grip - didn't like the ERGO vertical grip for benchrest.Nice job! I replaced the grip on my HM1000X - first with a MagPul then this ERGO Vertical Grip. Much better than the stock grip on the HM1000X. Also pretty easily installed - no chalk necessary!
Upvote 0
Just to free up the versatility of how one can hold the grip, ability to take thumb to palm side of grip I choose to use the Multi-Panel "CAA UPG16" grip.
Finger groove style and palm heal swell panels change out coming with 3 of each type.
I sure like the style of the Foxbat, but had read the grip ran Med/Small. Having XL to XXL size paws was never willing to take the chance on purchasing a set.
Finger groove style and palm heal swell panels change out coming with 3 of each type.
I sure like the style of the Foxbat, but had read the grip ran Med/Small. Having XL to XXL size paws was never willing to take the chance on purchasing a set.
Upvote 0