This is the only airgun that I have customized internally and externally many years ago. Now I only customize them internally
Upvote 0
Favorite PCP Personalizations (Pics)?
- Thread starter Mink
- Start date
Love how my custom, rattle can, winter cammo hydro dip that I put on my Brocock in the garage turned out. It’s one of a kind....
Upvote 0
What are some of your favorite/clever/unique PCP airgun personalizations? How do you make your guns your own? These can be for improving form and/or function, and they can be anything from "homemade" improvisations to aftermarket accessories. Note, this is not meant to be a laundry list of your scope, bipod, moderator, etc. (That includes you, kitchen-sink-Impact guy, try to contain yourself).
I'll start. My TAIPAN Veteran Long .22 is my first and only PCP. I have found 2 personalizations that I am enjoying so far.
1) Dope card for stock: Of course, trying to hit a target cold-bore at extended ranges requires some form of notes/software on pellet trajectory at various distances is necessary. I find the most convenient option is a simple dope card that I tape to my inside of my stock. Makes for an easy quick-glance reference that is easy to change. I will attach the Word doc that contains my template if anyone is interested.
View attachment 1596834899_12812066905f2dc45345cf15.17315018.docx
2) Leather cord wrap: I have always liked how people use leather wrap on slings and lever-action levers so I wanted to incorporate this on my bullpup. The thin bottom section of the stock makes for a nice spot to "spruce up". Doesn't help my groups but it makes my gun stand out a bit.
Who said Taipan Veterans were ugly?
Nothing ugly about those, but the edgun is better looking, imo. I Just gotta decide if it’s 400.00 better looking.
Upvote 0
Here is my.25 cal Condor, dressed up to blind in the elements, specially when your target are spooky squirrels! 
Renz
Renz
Upvote 0
My favorite personalizations to two of my favorite pcp’s.
Veteran with gray laminate stock, PapyYosh upgrades and red accessories. EDgun R5 with blue laminate stock and blue rings
Upvote 0
Put my evanix .30 hammer in free flight , then installed a magnet in the stock to slow down the return. Actually flattened my string noticeably. 
Upvote 0
Got these bad boys in route- purpose made bling, meaning 100% function but with looks. All made for the same gun.
Upvote 0
G
Guest
Guest
Got these bad boys in route- purpose made bling, meaning 100% function but with looks. All made for the same gun.
Who did your 3D printing?
Upvote 0
@ LT. Colombo- Elis5173 is a forum member here that made the FX sideshot mags. I owe all thanks to ACRUZ, who posted a review on Elis’s Work in the other parts and equipment section, which lured me in, lol. Eli’s does exceptional work, and he’s working currently on a couple other projects for me.
The Impact barrel clamp was of my design, measuring with what my impact has. My Impact houses the Saber Tactical ARCA rail, so all measurements had to work around that. The clamp is in route for me to test fit, and even if it does fit, it is still a one of. I only say that because the maker, SMW Engineering from the UK, told me another cohort of his that does 3D printing, said the bottle diameters of CF bottles on guns can vary in size from one bottle to the next, so it’s not a one size fits all. You will have to sketch up a drawing and pull all your own dimensions and send them to Stuart at SMW.
Stuart is also the guy that makes the wildcat figure 8 shroud clamps, that Myself and JoeKool have on our guns. Like Eli’s, Stuart at SMW also does exceptional work.
The Impact barrel clamp was of my design, measuring with what my impact has. My Impact houses the Saber Tactical ARCA rail, so all measurements had to work around that. The clamp is in route for me to test fit, and even if it does fit, it is still a one of. I only say that because the maker, SMW Engineering from the UK, told me another cohort of his that does 3D printing, said the bottle diameters of CF bottles on guns can vary in size from one bottle to the next, so it’s not a one size fits all. You will have to sketch up a drawing and pull all your own dimensions and send them to Stuart at SMW.
Stuart is also the guy that makes the wildcat figure 8 shroud clamps, that Myself and JoeKool have on our guns. Like Eli’s, Stuart at SMW also does exceptional work.
Upvote 0
Ran across these custom wood laminate pieces for FX Impacts for sale on eBay once. Thought they were very cool.
At the time they were also available in red.
At the time they were also available in red.
Upvote 0
Love how my custom, rattle can, winter cammo hydro dip that I put on my Brocock in the garage turned out. It’s one of a kind....
I actually really love this.
Here is mine as well. Bought as a synthetic continuum. Hand finished wood, custom moderator, port work, tune.
Upvote 0
SPA M22 conversion to .30 with 650 mm blank barrel, SSG, regulated, balanced valve, porting, retracting bolt, etc...
100 fpe with 68 grain handmade bullets (from 220 bar gives 18 regulated shots and 5 more "useful")...
very light handmade carbon fiber stock.
handmade full carbon fiber shroud.
total weight, included scope, 3.6 kg
100 fpe with 68 grain handmade bullets (from 220 bar gives 18 regulated shots and 5 more "useful")...
very light handmade carbon fiber stock.
handmade full carbon fiber shroud.
total weight, included scope, 3.6 kg
Upvote 0
Here’s another one of my favorite pcps packed with personalized accessories.
Two must haves for Leshiy imo are the Steven Brown grip and the CARM butt extension. My Leshiy is also sporting the CARM pellet dispenser, Ivan Tactical picatinny rail extender, DonnyFl extended shroud and foam wrapped air tubes.
Upvote 0