• The buying, selling, trading, or gifting of a standalone airgun moderator is prohibited in the Classified section. An airgun moderator may be included in your ad ONLY if it is "affixed" to the airgun. Please review the updated Classified Rules and Known Scammers List before engaging in ANY transaction.

Bipods/Rests Field Totes:

Classified Status
WTS

bowwild

Member
Dec 28, 2015
1,063
433
71
Lawrenceburg, KY
Feedback: 23 / 0 / 0
I've finished two rifle totes. This is my one of my retirement hobbies.

1. AMBROSIA MAPLE + RED CEDAR ACCENTS. - 1ST THREE PICTURES

2. SASSAFRAS + BLACK WALNUT ACCENTS.


I've added tie down holes, 2/side to use bungee cord or strap to secure rifle in the Tote. Finish is Danish Oil.
Leather protecting the rifles is thick and soft. I leave the leather a bit "proud" to make sure rifle doesn't touch wood edge. The rope handles are 1/2" polyethylene in chocolate melted on the ends to secure in the Tote.

I use lighter but sturdy hardwoods to keep the weight of the Totes down,.
  • The Sassafras/Walnut weighs 8 1/2 pounds.
  • The Maple/Cedar weighs 6 1/2 pounds.
One set of stock holders is for 480cc bottle guns and the other is for 30mm tube rifles. Joints are 14 dowels and waterproof wood glue.

Price is $160 including shipping TYD.



Maple and C edar Side.jpeg

Maple and Cedar End View.jpeg

Maple and Cedar Overhead.jpeg


Both cradles are about 9" wide, 21" long, and 8" tall. Made of solid kiln dried wood.



Tote with Bunji Holes.jpeg



Sassafras Tote Overhead Empty.jpg

Sassafras Tote End View.jpg




Tote Full Side with Bunji.jpeg


Tote with Ghost Side.jpg


Sassafras tote with Huben K1.jpg


Sassafras Tote Side View.jpg


Tote Full Side with Bunji.jpeg
 
Last edited: