Fill problem.

Here we go again . . . same Brocock fill valve issue. I and a couple others have created threads on this issue - it's a faulty / difficult to work on fill valve that is the culprit. They have an updated valve that I think solves this issue now. I'll dig around and link you to one of those previous threads.

I'll refrain from again calling this a stupid design flaw so that l.leon won't have to come into this thread to defend Brocock :ROFLMAO: :geek:

EDIT: here is the last thread on this topic, which also contains links to my previous thread about it as well as thread with the eventual fix:

 
Here we go again . . . same Brocock fill valve issue. I and a couple others have created threads on this issue - it's a faulty / difficult to work on fill valve that is the culprit. They have an updated valve that I think solves this issue now. I'll dig around and link you to one of those previous threads.

I'll refrain from again calling this a stupid design flaw so that l.leon won't have to come into this thread to defend Brocock :ROFLMAO: :geek:

EDIT: here is the last thread on this topic, which also contains links to my previous thread about it as well as thread with the eventual fix:

His response would go NUCLEAR! Some might call it... atomic
 
I had the issue once with my Compatto and once with my Bantam HR. In the case of the Bantam? I inadvertently blasted HPA into the valve and dislodged the Oring there. A simple O ring replacement fixed the Compatto, on the Bantam I simply pushed the Oring back into the groove it got blown out of. My Atomic XR which I pump by hand, by choice, has not leaked at all. It is such a simple fix, it really is a non issue. Not the “stoopid design flaw” some want to blow it up to be.🙀✌️The only things that I go Atomic on, are those pesky grain stealing pests. The results prove time after time what an awesome little platform it is.
 
  • Like
Reactions: Dr. Kralenstein
I had the issue once with my Compatto and once with my Bantam HR. In the case of the Bantam? I inadvertently blasted HPA into the valve and dislodged the Oring there. A simple O ring replacement fixed the Compatto, on the Bantam I simply pushed the Oring back into the groove it got blown out of. My Atomic XR which I pump by hand, by choice, has not leaked at all. It is such a simple fix, it really is a non issue. Not the “stoopid design flaw” some want to blow it up to be.🙀✌️The only things that I go Atomic on, are those pesky grain stealing pests. The results prove time after time what an awesome little platform it is.
It is definitely up my alley since I prefer the carbine guns. I really like the bantam sniper and hope to get one someday.
 
  • Like
Reactions: L.Leon