Filling with Micro Bore Hose

[Zeringue]

Hey guys I need some help. I have a GX CS4i on order along with an Alpha Filter. I plan on connecting the compressor hose to the inlet of the filter. I need a hose to go from the outlet of filter to the gun. I was looking on Air Tanks Plus and seen I can get a micro bore hose with a 90° which Is what I need, will the micro bore hose supply enough volume to the gun lot will it creat back pressure on compressor?

 

[OneAcreFarmer]

Hey guys I need some help. I have a GX CS4i on order along with an Alpha Filter. I plan on connecting the compressor hose to the inlet of the filter. I need a hose to go from the outlet of filter to the gun. I was looking on Air Tanks Plus and seen I can get a micro bore hose with a 90° which Is what I need, will the micro bore hose supply enough volume to the gun lot will it creat back pressure on compressor?

It is my understanding that all airgun compressors use a micro bore hose. Maybe I’m wrong.

 

[Ranchibi]

Micro bore hoses, AirTanksforSale hoses are the best for filling as they don't hold much air being "micro bore" when you bleed it after a fill. A fill hose that is not a micrbore will retain more air before pressure rises and then when bleeding after. Same with using from a tank to fill, hence why Edgun made the Easyfill that you don't bleed. When you bleed a hose after filling from a tank you waste that air .