Fillkit for 300 bar scuba bottle

[Babel]

Hey Guys!
I'm at my wits end here. I recently bought a bobcat .22 (SUPER excited ) and a 300 bar 6 ltr bottle to fill it. My problem is this: I simply cannot figure out which parts I need to connect the bottle to the 'cat. I know that I need to buy stuff like a hose/adapter etc etc, but which ones? Size etc? Sorry to be a bother if this should be self explanatory, but I'm a complete noob in this, and really just wanna shoot this gun I was planning to buy the bits from this place: http://www.bestfittings.co.uk/ 

Any help would be sorely welcome !
Cheers/ Peter

 

[billydjann]

I was in the same boat as you a while back...
I ended up studying and built my own... and made sure I had a regulater to adjust air....
I can send picture of what I did once I get home... not hard at all..... I also have 300 bar 6 liter tank but my tank is steel..
but just added a 30 minute carbon tank......

 

[Gunnertrones]

You will need this (Prod. code, Best Fittings):
04M1-KT15
02B3-KT01

Good luck!

 

[Enkey]

Hi Babel

You need a PCP air gun rifle charger filling charging adaptor. Two good options charging kit are MDE and FX.

 

[Guest]

Call Jim at Precision Airguns. He can get you set up with a nice kit for slightly more than what you would pay to build your own. 

 

[Ben10]

Give best fittings a call they are very helpful and will sort you out. 

 

[Babel]

Thanks for helping me out guys! It's worth solid gold to have the opportunity to ask questions like these! Billydjann, could you post a photo of what you've done? Sounds interesting Gunnertrones, the first product code does'nt work? I think I'll call best fittings, see if they've got an advice for me (since I think thats where I'll be buying - I live in Denmark, Europe so precision airguns is a bit far off ) Anyway, thx again!!

 

[Gunnertrones]

The product code is from the invoice from Best fittings..... 2014. You better call them I think.