Take reference from YouTube how to tune the gun... And stockpile your orings because you'll need it someday... 
Upvote 0
FX Finaly got an M3 impact
- Thread starter Gambler
- Start date
Got my .25 cal tension barrel kit today, but I have a hard time getting the TP off to replace it with my huma TP. Ive heated it but it wont Come loose, any suggestions?
Upvote 0
I completely screwed up my original TP on the Maverick wanting to put on the Huma dual port TP
FX used the sweet jesus do never come off again locktite on that sucker,,,,,,, right now on the huma one i use 0 thread locker, and it work just fine.
I think with the proper tools, and a shop i could have taken mine apart with no damage, but all i have is a living room table and some hand tools.
FX used the sweet jesus do never come off again locktite on that sucker,,,,,,, right now on the huma one i use 0 thread locker, and it work just fine.
I think with the proper tools, and a shop i could have taken mine apart with no damage, but all i have is a living room table and some hand tools.
Upvote 0
After looking at some vids on yt i May have the new "thing, all brass in one piece" TP so its not ment to Come off so I cant use my old huma tp from my crown xD
Edit: i think its the new FX v2 barrel inlet its called, huma dont have it with bigger port apparently, so I hope i can take off the one from my crown and swap them, they look Alike, the only difference is that the "old" model used o rings and a locknut to keep the liner in place and this new version dosen have a lock mechanic at all
Edit: i think its the new FX v2 barrel inlet its called, huma dont have it with bigger port apparently, so I hope i can take off the one from my crown and swap them, they look Alike, the only difference is that the "old" model used o rings and a locknut to keep the liner in place and this new version dosen have a lock mechanic at all
Last edited:
Upvote 0