This isn't a detailed description on how to tune the condor or talonp but more of a thank you for those of you that have helped me learn the craft over the last 2 years I've been working on airguns. For the talonp I built for my daughter I did the oring behind the top hat and a 177cal transfer port from the ring lock system. I can't remember the diameter at the moment but whatever the 177 condor comes with is what I used anyway I'm getting almost regulated spreads on that one. On the condor I have the nylon washers on there which are not my favorite to work with but now that I have the top hat spacing down it's great. Im getting a ton of shots at again almost regulated spreads using 25g jsbs at 850 fps and when I want to go for power I put on the biggest diameter top hat and move the tophat forward a bit. I just got 1020fps on 38.9g Neilson specialty slugs and can get 4 shots within 10 fps before it starts dropping about 10 fps per shot. That's fine by me as it's tuned to kill the raccoons that harass my cat every night. Not really plinking with it. Anyway guys thanks for your help and if you guys want I can give exact numbers and a full description of what I have done if anyone needs help with thiers. I'm just not near my notes at the moment.
