First Major Modifications for the Notos

[KatoKevin454]

KatoKevin454 do you think this will work to add plenum- would use a smaller length bottle- adds 2 3/4 inch to length.

View attachment 383792

yes, but I'd try to keep the weight down, don't want to over stress the fittings, too much and they could break, that's why I used the carbon bottle,
the longer you make it the more stress put on the fittings, leverage, so try to keep it short, I used a 500cc bottle because that's what I had already, I think the 200cc or 300cc Carbon fiber bottles are perfect for the application

 

[KatoKevin454]

The 700cc bottles are skinnier than the 580

that's just getting too long

 

[KatoKevin454]

made this one for my brother, used a different drop block with internal regulator, still had to modify the length to clock it, but it has clearance for the Bottle

 

[KatoKevin454]

it was a humid day when I filled the bottle, so it Fogged up the Gauges, it cleared up after I turned on the A/C....

 

[elwoodblues]

That wet air is really bad for your guns internals, and that is definatly inside

 

[jarmstrong]

That wet air is really bad for your guns internals, and that is definatly inside

the air in the gauge face is from the atmosphere not from the bottle fill

 

[elwoodblues]

Is it on the inside of the glass or the outside

 

[jarmstrong]

pressurize air is only in the bourbon tube, the air inside the gauge cover is atmosphere pressure unless it is a fluid filled gauge, then the gauge uses a rubber plug to hold the fluid in the housing,,, when a bourbon tube fails and leaks, it will blow that rubber plug out or at least push out some fluid