Fitting from compressor to tank?

[Elgreco]

Hello All,
I just bought a big omega tank to fill my pcp. I am located in the Virgin Islands and the scuba diving shops here tell me that they don't have the right fitting to connect from.their compressor to my tank. Do you all know what I need?

 

[Privateer]

You probably have a SCBA tank and dive shops are set up for SCUBA.
There are SCUBA to SCBA adapters out there.
A picture of your tank would help to guide you.

 

[Gerry52]

A picture would be very helpful to determine the correct fitting for your tank. Also to know what fitting diving shop uses! They might only fill to 3200psi max (hp Scuba) What gun(s) do you have? A 3k psi fill isn't much on some guns. This is all vital to getting correct info to you! And, most importantly, when can I visit
Edit: you might need a CGA347 fitting to a Scuba Block (K valve adapter). I have one!

 

[Ca_Varminter]

Omega tanks comes with 2 types of valves....
A standard DIN valve... which is what all SCUBA center should be able to fill...
Or the HP3 Valve.... This has a standard Fosters nipple on it....
So what you will need a DIN 300 to Foster QD female adapter....

DIN200/DIN300 to Female Quick Disconnect Adapter

For use at SCUBA shops that require a DIN connection.

www.topgun-airguns.com

 

[Elgreco]

Thanks to all that have replied. I will update the thread tomorrow with a pic of my tank just to be sure. It fills at 4500 psi. And yes anyone is welcome I am located in St Croix, USVI and believe it or not there is a strong airgun community here with shooting events every week.