The female foster fitting on my fill rig, (ebay model) broke after a couple years. I am trying to replace but my AV fitting (PA) WON' T thread on. It seems to be the same dia. Are there different pitches on hpa fittings?
Fitting Problem
- Thread starter Keyman62421
- Start date
Yes there are different thread pitches and a lot of them look very close to the same. Be more specific with what your fill source is and I’m sure someone with the knowledge will chime in.
Upvote 0
G
Guest
Guest
i have an ebay tank and the the tank valve is metric you might have the same issue unfortuantly
Upvote 0
The threads on my Vevor (Chinese) compressor fittings are M10x1 and I had to buy an adapter to use my microbore hose with it (1/8bsp).
Keyman, I have one of the brass female foster fittings that I took off my Vevor fill hose if you want it. I'll never use it because I always put the microbore hose on whatever fill source I'm using.
Keyman, I have one of the brass female foster fittings that I took off my Vevor fill hose if you want it. I'll never use it because I always put the microbore hose on whatever fill source I'm using.
Upvote 0