I noticed that my FX impact mk1 not holding air like it used to, is it normal? And how hard is it to reseal, or is it best left to a gunsmith?
Tuning Fix impact resealing
- Thread starter sfrank37
- Start date
Likely an o-ring at the regulator see if air comes out of the tiny hole behind the safety soapy water time.
Upvote 0
If you lucky soapy water around both manometer threads maybe just those o-rings may get by tightening just a smidge not too tight though They don't work if o-ring squashed.
Upvote 0
It's not hard to do. I just resealed mine a month ago or so for the first time, but do as Odoyle suggested first. There are helpful YT videos that will help you to see how to break the gun down. Probably sorting out the O-rings you need in the correct Buna hardness is more difficult, but if you have deep pockets you can just order a reseal kit from various sources.
Upvote 0
Thanks for your help, I think I’ll order a complete kit and watch some videos, I’m pretty mechanically inclined so I should be able to.
Upvote 0