What are you using as a front sight on your LDC ? Where did you get it, how did you attach it ?
Front sight on a LDC ?
- Thread starter john4321
- Start date
You can cheap out and epoxy or screw a grubscrew or nail sideways or drill it then epoxy to stick up into the LDC.
Shotgun slip over front sight epoxied.
THIS on a TKO.
https://www.ebay.com/itm/12GA-20GA-Snap-on-Green-Fiber-Optic-Universal-Front-Sight-For-Shotgun/372916659888?hash=item56d390a6b0:g
dwAAOSwBTleINux
https://www.ebay.com/itm/Snap-on-Red-Green-Fiber-Optic-Universal-Front-Sight-For-Shotgun-Barrel-12-Ga-2pk/223027722510?hash=item33ed7cf90e:g:THIAAOSwDDRb2Vtc
You can get this it has the front sight and way cheaper.
https://www.airgunnation.com/topic/one-ounce-27-00-ldc-quieter-than-a-tko/
https://www.airgununiverse.net/wp/store/
Shotgun slip over front sight epoxied.
THIS on a TKO.
https://www.ebay.com/itm/12GA-20GA-Snap-on-Green-Fiber-Optic-Universal-Front-Sight-For-Shotgun/372916659888?hash=item56d390a6b0:g
dwAAOSwBTleINuxhttps://www.ebay.com/itm/Snap-on-Red-Green-Fiber-Optic-Universal-Front-Sight-For-Shotgun-Barrel-12-Ga-2pk/223027722510?hash=item33ed7cf90e:g:THIAAOSwDDRb2Vtc
You can get this it has the front sight and way cheaper.
https://www.airgunnation.com/topic/one-ounce-27-00-ldc-quieter-than-a-tko/
https://www.airgununiverse.net/wp/store/
Upvote 0
Back when I was shortening a Government 1911, .45, I wanted to shoot it to make sure everything was happy together before I had it coated with dry film lube.
On a shooting outing with my Dad, he had recently bought a Gold Cup, version of the 1911.
It really pissed him off that he shot better with my cut up, looking like hell, government surplus 1911, used up barrel (much of the rifling is worn away), with a piece of silver duct tape for a front sight than he did with his new Gold Cup.
Mike
On a shooting outing with my Dad, he had recently bought a Gold Cup, version of the 1911.
It really pissed him off that he shot better with my cut up, looking like hell, government surplus 1911, used up barrel (much of the rifling is worn away), with a piece of silver duct tape for a front sight than he did with his new Gold Cup.
Mike
Upvote 0
Hey John.
I make most of my own parts and made these. You need a long or a short? Shorts are about 1/4" and the long is about !/2" You will need to drill and tap a #5-40 for mounting. The fiber optic sight is specific for the diameter of the moderator. That one is for 25 mm and 1" diameter cans. Can use picture mounting tape or super glue to mount. Pick one and PM me with an address to ship to and I'll get it in the mail.
I make most of my own parts and made these. You need a long or a short? Shorts are about 1/4" and the long is about !/2" You will need to drill and tap a #5-40 for mounting. The fiber optic sight is specific for the diameter of the moderator. That one is for 25 mm and 1" diameter cans. Can use picture mounting tape or super glue to mount. Pick one and PM me with an address to ship to and I'll get it in the mail.
Upvote 0
