Tuning Full LCS SK-19 Tear Down and ReBuild (Master Class) Video

Jump to latest Follow Reply
kaylaindy

kaylaindy

Member
Jun 3, 2017
3,360
1,437
Washington, United States
1.1645239658.JPG


Hey guys. In this video I took every part out of my SK19 and then re-assembled it. This is a rare glimps at how one of the best PCP rifles on the market works, in and out. Thanks for watching! -Nate 

P.S. This video has been reviewed and approved by LCS. 

https://youtu.be/1BiVsnu7zNU

2.1645239731.JPG


6.1645240565.JPG

 
  • Like
Reactions: neehooya
Hey, Thanks for the props...but LCS told me how to do all that stuff. I can't take credit for being that smart. If I was that smart, I would tear down the Delta Wolf.

Hopefully it will be a good reference for SK19 owners....the video is technicaly from LCS. I just filmed it.

...but yeah, pretty interesting stuff! I'm glad to be a part of it. -Nate 
 
  • Like
Reactions: neehooya and Butch
Upvote 0
Best information on the SK-19 yet!

I would like more information on the Rate of Fire adjustment, as mine is notably slower than most of the videos I've seen.
Click to expand...

Yep top allen under the loading door, turn it out a little at a time. If you go to far you will know.....it will shear the pellet and blow all the air out of the gun right into your face....been there done that.
 
Upvote 0
I couldn't even work on a house / mansion sized diesel engine with gloves like that :) pretty much only used gloves when welding or sandblasting.

Okay when you crawl around in a exhaust manifold a few hours after the engine have been stopped, you do want gloves, and knee pads,,,,, and one helluva supply of fresh air,,,,cuz DAMN hot

And yes a 6 foot 3 guy like me fit in there just fine, if it wasent for the fins i would have been able to shimmy my way out the turbo and up the exhaust. :)
 
Upvote 0
Nate, it appears that changing the magazine and barrel is all that is necessary to change calibers??
Click to expand...

That's a great question. I will try and ask LCS....or actually, I will shoot that question over to AOA, they would know.

I have no idea if that's possible...but it would make sense.
Click to expand...

It would be great if it were so and they would make magazines available. I'm currently waiting for a LW unchoked barrel for my .22 for some slug action. A .25/30 conversion, much like FX does would be first on my list.
 
Upvote 0
It’s too bad flanged inserts can’t be inserted thru the rear of the mag, and they be held on snug by a friction fit o ring, that reduces the diameters so a LCS in 30 cal can be reduced down to 25 or 22, just with these reducing inserts, and of course a different barrel. 


if this was possible, there wouldn’t be a need to tear the gun down to switch out the rotary mag
 
Upvote 0
I would like more information on the Rate of Fire adjustment
Click to expand...

I think you just turn the screw a bit and it will change the Rate of fire. Small adjustments. I like the slower rate of fire because you can keep your shots on target.
Click to expand...

Wow ... finally got around to looking at this adjustment and on my gun there is no adjustment screw there!!! Not even a hole in the plate! Do you think there is an adjustment under the plate?
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu