FX bobcat MK2 in.25 cal

Jump to latest Follow Reply
Maarodigro said:
Can i remove the air sylender while it is full of pressure on 200 or 180 bar
Click to expand...
When you shoot 33.95 gr JSB pellets what is the regulator setting and what is the hammer
RM100GUY said:
Get some JSB 33.95s, my Mk2 likes them best...I never adjusted my hammer spring much and mine shoots 33s at 775...and does fine at 100 yds...I shoot 25gr on low power mostly. I think 800 to 825 would be easy with the 33s with slight HS adjustment if necessary....I don't mess with mine...I would ignore the reg gauge and just shoot some 33s and see how they work and check your shot count think mine was around 90 out of the box on high. The Bobcat is an EXCELLENT airgun...good luck!View attachment 342465
Click to expand...
Please tell me when you shoot JSB 33.95 gr at that time what is the regulator setting and what is the hammer wheel setting on your bobcat MK2
 
Upvote 0
Maarodigro said:
When you shoot 33.95 gr JSB pellets what is the regulator setting and what is the hammer

Please tell me when you shoot JSB 33.95 gr at that time what is the regulator setting and what is the hammer wheel setting on your bobcat MK2
Click to expand...
The reg pressure is 135 bar, on high power I get 775 fps, to access the hammer spring on the Bobcat the stock must be removed...so I can't say how its set...but its close to factory setting maybe a 1/4 turn increase...
 
  • Like
Reactions: Maarodigro
Upvote 0
RM100GUY said:
The reg pressure is 135 bar, on high power I get 775 fps, to access the hammer spring on the Bobcat the stock must be removed...so I can't say how its set...but its close to factory setting maybe a 1/4 turn increase...
Click to expand...
Can you plz share srelok pro app setting for FX bobcat MK2 in.25 cal
Because i am new and i need that setting if possible
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu