FX Fx Bobcat Mkll

[skarnac]

Hi All ,
New to the site and to pcp airguns.
I inherited 3 Pcp’s one being a bobcat mkll .30. I have been researching replacing o-rings so I started taking apart air tube and removing two screws from bottom of stock but can not remove stock , it will not budge. From wht I’ve read it should lift straight out. Any help would be appreciated.

 

[zx10wall]

Have you removed the air tube? If not, you need to remove the air tube. There is a valve which allows you to remove the tube with pressure in it.

 

[skarnac]

I have removed the air tube , im not sure what valve you’re talking about.

 

[skarnac]

After reading your post I realized i was missing something on the air tube so I screwed it back in tighten it and unscrewed it , out comes the valve and stock comes right off.
Can you tell me where to buy parts / orings and who works on these guns if I need some help?
Thanks for your help

 

[jking]

Would it not hold air? I'm hoping it's one of those tales that "it's 12 years old and still holding air". Got my fingers crossed but still curious.

 

[skarnac]

Unfortunately it is not holding air so any advice would be welcome , im pretty mechanical been around guns my whole life so i hope I can tackle this

 

[Gzman]

https://fxairguns.com/wp-content/uploads/2022/01/Bobcat-MKII-1.pdf

Not sure if link will work

 

[skarnac]

Thank you for the PDF

 

[skarnac]

Any ideas on where to go for parts for these older fx guns?

 

[Ezana4CE]

Any ideas on where to go for parts for these older fx guns?

@skarnac Try contacting Utah Airguns. I believe that they’ve taken over service and distribution for FX in the U.S.

 

[Gzman]

FX Air Gun O-Rings & Oring Kits

Replacement o-rings and oring kits for FX Air Rifles and Air Pistols. Repair or rebuild your air gun's o-rings to get it back into top shape.

www.captainoring.com

 

[Ezana4CE]

FX Air Gun O-Rings & Oring Kits

Replacement o-rings and oring kits for FX Air Rifles and Air Pistols. Repair or rebuild your air gun's o-rings to get it back into top shape.

www.captainoring.com

@Gzman I don't see a Bobcat MkII kit on the page that link leads to. Is this something the OP can call the company and ask them to put together for him?

 

[Gzman]

@Gzman I don't see a Bobcat MkII kit on the page that link leads to. Is this something the OP can call the company and ask them to put together for him?

@Ezanac4CE Yes, I have called them in the past and they usually work with me putting together a kit if they don’t have one listed.

 

[skarnac]

Thanks everyone for the help

 

[STEVEY]

Hi All ,
New to the site and to pcp airguns.
I inherited 3 Pcp’s one being a bobcat mkll .30. I have been researching replacing o-rings so I started taking apart air tube and removing two screws from bottom of stock but can not remove stock , it will not budge. From wht I’ve read it should lift straight out. Any help would be appreciated.

You have to remove the air tank before you remove the stock.

 

[STEVEY]

Any ideas on where to go for parts for these older fx guns?

I purchased a complete oring kit for my Bobcat MK1 on ebay.

 

[STEVEY]

Unfortunately it is not holding air so any advice would be welcome , im pretty mechanical been around guns my whole life so i hope I can tackle this

eBay item number :114196106605 This is the item # for a complete MK1 rebuild kit from ebay. I received mine for $30.00 Very happy with it.

 

[skarnac]

Thanks STEVEY
Got kit today.

 

[Ezana4CE]

eBay item number :114196106605 This is the item # for a complete MK1 rebuild kit from ebay. I received mine for $30.00 Very happy with it.

Does the Bobcat MkI kit work with the MKII?

 

[STEVEY]

eBay item number:112965850014 - This is the item # for the MK2