FX FX BOSS bottle QUESTION

Jump to latest Follow Reply
SilentSquirrel

SilentSquirrel

Member
Jun 1, 2019
2,061
1,424
The other Washington, United States
Hello members
I have been casually keeping my eyes open for an FX BOSS.
Tonight, while reading some more about the rifle there was something in the specifications published by FX that had gone unnoticed.
That is, according to FX, the air cylinder (bottle) is "not removable"
Here is a link to the specs

THE BOSS - FX Airguns

“Revolutionary” is the only word that describes the FX Boss and the development of this rifle. With a custom made .30 caliber Smooth Twist barrel.
fxairguns.com fxairguns.com

My question is does that mean:
You can't remove the bottle?
or
The bottle must be de-gassed before removal?

I'd like to hear from those in the know

Thanks
Edward
 
The original has a metal cylinder not removable without degassing but I believe can be replaced with a carbon fiber with the same valve as the Impact to make it lighter ETC.

14.jpg
 
  • Like
Reactions: SilentSquirrel
Upvote 0
joelayfield said:
i have a project this weekend swapping out bottles , i thought i was removing a valve from one bottle and installing it in the cf bottle , i guess I'm unscrewing a empty gun and screwing on a new bottle ? didn't know there wasn't a valve in the old aluminum bottle the older boss came with stock , anything i need to know ?
Click to expand...
Yes @joelayfield
From my reading (no direct experience with the Boss 30) it is quite possible the original bottle does not have a valve in it.
Therefore, for safety it seems prudent to de-gass before removing the bottle.
Please update this thread with what you learn
I'm especially curious to know whether replacing the original bottle with a CF bottle containing a valve will allow BOSS bottle removal without de-gassing the bottle

Gerry52 said:
My CF bottle is removable, (don't know about metal one) but have to depressurize regulator if working on gun. Easily done by carefully unscrewing the foster fill unit (not foster fitting but "housing" it screws into). Crack it open slowly til it drains reg.
Click to expand...
@Gerry52
Regarding de-gassing
I know on the Royales there is a screw fitting beneath the stock screw that can be opened to de-gass. (Thanks @jking)
It is there also on the BOSS
Take a look at parts # A19 & 20. on the attached FX diagram
If I open that screw with the bottle attached to my Royale 400 the bottle and regulator empty
If removing the bottle first, then opening the screw the regulator de-gasses
Maybe that works on the BOSS also

Edward
 
Upvote 0
SilentSquirrel said:
Yes @joelayfield
From my reading (no direct experience with the Boss 30) it is quite possible the original bottle does not have a valve in it.
Therefore, for safety it seems prudent to de-gass before removing the bottle.
Please update this thread with what you learn
I'm especially curious to know whether replacing the original bottle with a CF bottle containing a valve will allow BOSS bottle removal without de-gassing the bottle


@Gerry52
Regarding de-gassing
I know on the Royales there is a screw fitting beneath the stock screw that can be opened to de-gass. (Thanks @jking)
It is there also on the BOSS
Take a look at parts # A19 & 20. on the attached FX diagram
If I open that screw with the bottle attached to my Royale 400 the bottle and regulator empty
If removing the bottle first, then opening the screw the regulator de-gasses
Maybe that works on the BOSS also

Edward
Click to expand...
YES! The STOCK screw, not the foster. I knew that (as I've had to do it more than once). Can't believe I wrote that about the foster! What the heck was I thinking when my fingers were typing? Sorry! So glad you caught that & corrected me. Worries me now that I did that. Yes, the stock screw housing will degas the reg.
 
  • Like
Reactions: SilentSquirrel
Upvote 0
joelayfield said:
i have a project this weekend swapping out bottles , i thought i was removing a valve from one bottle and installing it in the cf bottle , i guess I'm unscrewing a empty gun and screwing on a new bottle ? didn't know there wasn't a valve in the old aluminum bottle the older boss came with stock , anything i need to know ?
Click to expand...
Joe, just remember to degas reg also. That's done by unscrewing (slowly) the stock screw HOUSING (what the stock screw was screwed into before you removed the stock) part # A20 on FX Boss diagram.
 
Upvote 0
i just want to put a cf bottle on this thing , i dont have a valve , i thought i was going to take the valve out of the aluminum bottle thats stock on the gun and install it on the cf bottle , , can i just unscrew this bottle off and screw the new cf bottle on ? did they glue a fitting into the bottle that makes this job a mess ?? i dont care if the bottle has a valve if it will just swap out ,
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu