Question. On the 600mm .25 barrel is this end supposed to be able to unscrew to attach a moderator? I believe I got one with the gun in the box (just a hollow tube) one side threaded and one size looks to be the .25 caliber size. I cannot got the life of me unscrew this end cap piece tho even with a rubber lid opener to help. So looking for input here. Didn’t wanna bust out the vice grips and Knick my new gun up and still not succeed.
Fx crown barrel moderator
- Thread starter TigOleBityz
- Start date
Question. On the 600mm .25 barrel is this end supposed to be able to unscrew to attach a moderator? I believe I got one with the gun in the box (just a hollow tube) one side threaded and one size looks to be the .25 caliber size. I cannot got the life of me unscrew this end cap piece tho even with a rubber lid opener to help. So looking for input here. Didn’t wanna bust out the vice grips and Knick my new gun up and still not succeed.
Cool thanks I’ll try that. Would putting that moderator that came with it in the box change the POI at all? I just got it on a dime and been whacking doves. Not sure if it’s worth it.
Upvote 0
I have a strap wrench, but I prefer to use gloves with a rubberized grip (the tackier the better). I would take the barrel off and grab it firmly with both hands. That end-piece should not have any loctite on it, so it must just be friction. As douger mentioned, a little heat might also help.
Upvote 0
Got the son of a bitch lol had enough and just vice gripped it gently with a towel as a buffer. Fx factory moderator is on and my god even without baffles it’s quieter. Thanks for the advice and intel that it surely was removable. Got 3D baffle print from a forum member on here now just need to find somewhere to print them for a decent price
Upvote 0