• The buying, selling, trading, or gifting of a standalone airgun moderator is prohibited in the Classified section. An airgun moderator may be included in your ad ONLY if it is "affixed" to the airgun. Please review the updated Classified Rules and Known Scammers List before engaging in ANY transaction.

PCP Rifle FX Crown MkII 500mm .22 in GRS Stock

Classified Status
WTS

NAProf

Member
Oct 10, 2021
294
418
71
Lewes, Delaware, United States
Feedback: 22 / 0 / 0
FX Crown MKII with Nordic Wolf GRS stock. This rifle is set up with a 500mm .22 barrel. Asking $1500 TYD for rifle with, two FX magazines, and a hard case (scope, wheel and bipod not included). PayPal (FF or invoiced if you pay additional %) preferred.

1742938539064.png


I machined out a place for an inset Anshutz UIT rail which is screwed and epoxied in place (similar to the Dreamline GRS stock). Included is a 45mm long picatinny rail which slides in the UIT rail allowing me to use picatinny bipod attached to the stock rather than the bottle adapter.

1742938583199.png


The rifle has the FX Crown Power Upgrade kit (new spring carrier, 10 gram hammer weight, pin probe) installed, but I decided to put in a heavier Huma Brass hammer weight and keep the pellet probe. I will include the parts removed as well as the pin probe and 10 gr hammer weight.

As setup now I am shooting JSB/FX 18.1 gr pellets at 880fps with an SD of 2 and an ES of 9. I just tried the AEA 21.9gr Diabolo pellets at 820fps and am getting ES of 7 and SD of 1.5. Check out the AGN 30 Yd Challenge for an example of the accuracy at 30 and 40 yds. Last week scored a 200/200 with 15x’s on the 30yd Challenge with the 21.9’s (see Post #3018).

30-Yard Challenge | Page 151 | Airgun Forum | Airgun Nation | Best Airgun Site | Airgun Message Board